Shopping for a color remover is like buying any other kind of treatment for clothing. You must consider certain things to ensure you are getting the right product. Here’s what to look for. 1. Fabric Compatibility Rit Recommend using the Oven Top method from there. However you can also use in a washing machine (see further below). As you agitate the fabric, it’ll begin to release the dye and fade in color. This is an important step when using Rit color remover. It helps to ensure that all of the dye is evenly removed from the fabric. If a color remover does not work on specific colors, it will often be indicated. Make sure the remover you choose works with your dye. 3. Ease Of Use With a little bit of patience and care, you can achieve the desired result and give new life to an old piece of clothing. Choosing the Right Amount of Rit Color Remover

Rinse Thoroughly: Once you’re satisfied with the color removal, rinse the garment thoroughly with cold water to stop the process. If you’ve seen my other posts about dip-dying things, this process is very similar. Instead of dying your fabric, it just makes the color disappear, like in those old oxy-clean commercials.To dissolve the product, start by boiling the necessary amount of water in a large pot or container. Once the water has come to a boil, remove it from the heat source and slowly add the Rit color remover powder, stirring constantly. Keep stirring until the powder has completely dissolved and the water is clear. Liquid color removers are most often ready to use out of the bottle and easy to measure too. On the flip side, they can’t sit for too long without separating or evaporating. Screen prints also can usually be safely laundered with bleach. As well as synthetic fibers such as polyester, nylon, and acrylic can often be safely bleached when fibers were dyed in polymer form, before the fiber was extruded. Can I bleach a white shirt with colored print on it? Most color removers have a problem with washing machines, but not Carbona. It is compatible with anything; front loaders, top loaders, and even hand washing in a tub. Most Rit dye and color remover works best for cotton and natural fabrics. They make some special dyes for synthetic fabrics as well, so be sure you know what type of fabric you are starting with.

From Jacquard, a renowned dye manufacturer, discharge paste is a chlorine-free non-bleaching color remover that pulls off color from clothing. Remember to always follow the manufacturer’s instructions when using Rit Color Remover, as failure to do so can result in damage to your fabric or clothing. With proper care and attention, however, you can successfully remove unwanted dye and restore your fabric to its original color. Troubleshooting Common Issues Now that you’ve soaked your fabric in the Rit color remover solution, it’s time to remove it and move on to the next steps. However, they each have their pros and cons. The powder can be pretty messy during use and may have additional mixing steps. On the other hand, it’s easy to store and has a longer shelf life. After preparing your garment, you’re ready to begin using Rit Color Remover. Follow the instructions carefully, as improper use can damage your garment.Next, carefully submerge the fabric that you’re un-dyeing in the solution. (I’m not sure what kind of chemicals they use, so take basic precautions not to splash any on your skin or eyes.) Versatility: Color Remover is suitable for use on a wide range of fabrics, including cotton, linen, wool, silk, and synthetics. It can be used with both natural and synthetic dyes.