Reciprocating saw: This is even more versatile than a jigsaw since it can be used for larger diameter pipes. Use wood-cutting blades for plastic pipe, metal-cutting blades for metal pipes.

PVC ratchet cutters are amazing tools for working with PVC pipe. Operating something like a pair of ratcheting shrub pruners, each time you squeeze your hand, the cutter ratchets closed, cutting a small amount of pipe material until you have cut through the pipe. Hose and tube cutter – resembling a pair of garden shears, it is ideal for cutting soft tubing such as rubber. One of the advantages of using a pipe cutter is how cleanly they cut. A cut made with a pipe cutter will usually need very little deburring to none, meaning you also save time. And the pipe cutter is safer than many alternative tools used for cutting. What does a Pipe Cutter look like? These large chain-type cutters will cut cast iron, clay, and concrete pipes. There are both ratchet and scissor versions of this tool. Snap cutters operate with a chain fitted with a row of sharp cutting discs. Once the tool's chain is wrapped around the pipe and tightened, it eventually snaps the pipe as cleanly as if it had been cut by a saw.Copper tubing cutters are specialized pipe-cutting tools that come in many shapes and sizes, from small thumb cutters to quite large tools designed for big pipes. All types work in essentially the same way: The tool grips a pipe between rollers and a sharp cutting wheel, and as the tool rotates around the pipe, it scores a gradually deepening cut into the walls of the pipe. Crosscut hand saw: An ordinary carpenter's saw can work fine for cutting rigid plastic pipe, but should not be used with metal.

If you wish to cut a previously installed pipe, you will need to shut off the water supply before attempting to do so. Step 2: Measure and mark Measure the necessary length of pipe and mark it. To achieve a straight line, roll cardboard or heavy paper around the pipe and mark your line by tracing along the edge. Step 2: Positioning the Pipe Cutter With the cutter wheel on the tube, turn the cutter completely around the circumference of the tube. This should create a cut groove on the tube. Step 4: Cut through Use a deburring tool at the cut end of the tube to remove any burrs and ensure that the cut is smooth. Sand the tube until smooth. Rinse away any remaining particles. Conclusion Automatic pipe cutter – a highly efficient and compact cutter, it is often called a splice and is shaped like a “C”.Using a copper tubing cutter on materials other than copper tends to dull the cutting blade, so if you do this regularly, expect to change the cutting wheel occasionally. Standard copper tubing cutters have a larger body and handle that makes it easier to rotate the tool around the pipe. Many standard cutters have reaming tools built into them, designed to smooth the cut edges of the pipe before soldering or fitting. Jigsaw: Fitted with the right blade, a jigsaw can cut nearly any plumbing pipe up to about 1 1/2 inches in diameter. A wood-cutting blade easily cuts plastic pipe; use metal-cutting blades (and a slow saw speed) when cutting copper or other metals.