LIGHTAILING Light Set For (Ghostbusters Ecto-1) Building Blocks Model - Led Light kit Compatible With Lego 21108(NOT Included The Model)

Product Information

Take the front section of the roof and remove the white roof plate from underneath, then remove the transparent blue triangular pieces, followed by the grey pole with attached light pieces. This kit has not one, but two sound modules, and together these modules can play four sounds at the same time. This provides the most realistic sound possible, including: Take the 5cm connecting cable from the kit and connect it to the last available port on expansion board#2.

One 3-Voice Polyphonic Sound Chip with Ecto-1 Siren, Engine, Door, and Alarm Sound EffectsPre-Loaded Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do not force it. The Modular Building series is a dream come true for adult fans of LEGO®. With ultra-detailed buildings, ranging from a Town Hall (10224) to a Detective's Office (10246), there is enough variety in sets to create your own large scale LEGO® town. And now with our easy to install light kits, you can create your very own realistic and fully functioning town. LEGO® Technic Continue to remove the following pieces which make up the windscreen, side windows, and grey triangular tiles from the sides of the car. Authentic Cadillac ambulance engine sound that loops until you stop it. Includes unique start and stop sounds, and even a great"engine stall" sound that will be triggered 40% of the time when you start the engine.Remove the following pieces from the 2×6 plate and then connect one of the provided grey 1×2 Lego plates on each side as per below. Locate 2 of the provided grey plates with clips as we will be replacing the original ones with these. Take another 2 flashing Bit Lights and install them by placing them over the studs and connecting the blue transparent round pieces over the top.

The LEGO® Technic range offers fans thirsty for a challenge an opportunity to build more complex sets using advanced building techniques and pieces. With a high degree of playability and movable parts, the Technic range is perfect for those wanting to create realistic recreations of real-life machines. Take the front grey pole with attached lights and disassemble all the pieces as we will be replacing the grey pieces with new pieces (with different clips). Take another standard Bit Light (non flashing) and install it with the LED component part facing down (as it wont connect with it facing up). Secure this into place by connecting another transparent blue plate (which we have provided) over the top. Ensure the LED component part is facing down or inward Take 1 standard Bit Light (non flashing) and place it on top of the stud of the grey round plate ensuring the LED component part is facing the correct way up. Secure the LED in place by connecting the transparent Lego plate over the top.

What's in the box

The LEGO Ghostbusters Ecto 1 (21108) is a faithful recreation of the iconic vehicle from the hit 80s movie franchise, Ghostbusters! Take another expansion board ( expansion board#2) and connect the first group of 6 lights from the front section of the roof to the first available ports on the expansion board. CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light. Connecting cable connectors to Expansion Boards Take the white 4×4 plate with pieces attached and disassemble the pieces as we will be replacing the 2 grey pieces. When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed). You can either place them directly on top of LEGO® studs or in between.

Take one of the provided grey Lego pieces with clip and place 1 standard Bit Light (non flashing) on top of the stud. Secure the LED in place by connecting the transparent red round piece over the top ensuring that the LED component part is facing the correct way up. Ensure the cable from the LED is facing the same way the clip underneath is facing

LEGO® Modular Building Series

Take 1 flashing Bit light and place it on top of the grey stud closest to the outside of the plate ensuring the LED component part is facing the correct way up. Secure this in place by connecting one of the provided transparent blue 1×2 plates over the top. Repeat this for the light on the other side ensuring the LED is installed to the stud closest to the outside and the LED component is facing the correct way up. Ever wanted to create your own LEGO® set? That's exactly what LEGO® Ideas is! Fan-submitted creations have now been turned into actual commercially available sets! Super popular ideas like the NASA Apollo Saturn V (21309) or the Old Fishing Store (21310) are sets people can now own. And now you can combine our specially designed LEGO® lights to your collection and bring them to life! Easy to install LEGO® light kits

PLEASE NOTE: THIS IS ONLY LeLightGo LEGO LIGHTS. LEGO® SET IS NOT INCLUDED. ABOUT WARRANTY & SERVICE Hide 2 cables from the lights on the left side of the car (looking from the front) up the left side by laying them in between the white studs and then reconnecting the grey triangular plates over the top of them. To find a lighting kit for your LEGO® set, simply scroll and browse below to find the appropriate light up kit. You can also use the search function above and type in the model name or number to find your set. Repeat this step for the cables from the tail lights, twisting/winding them around each other. We should now have 2 groups of cables. Reconnect the transparent blue triangular plates we removed earlier on top of the additional plates we just installed.

Warranty & disclaimers

To ensure a trouble-free installation of your light kit, please read and follow each step carefully. Reconnect the 2×6 plate to the rest of the roof, without the white plate underneath. Then remove the red light with white stud underneath so we can install another flashing Bit Light to it.