This remote control car can support a 7.4V lithium battery by default. As long as the size can be put down or fixed, you can use a larger capacity lithium battery. Note that the discharge factor is preferably 15C, the voltage should be 7.4V, and the material should be lithium battery. Question: what is the size of the battery compartment? what maximum size of the lipo battery does it takes? up to lipo 2s 60c 6000mah?

The remote control car produced by the original factory does not support a 3S battery and will burn out. If you have to modify the 3S 11.1v battery, you need to upgrade the receiver board, remote control, motor, and ESC, steering gear. use. Question: Since this has an upgraded battery included, is it premodified to fit the larger battery? or do we still need to modify it ourselves? Most of the equipment of this remote control car is waterproof, which can drive in less watery terrain. At that time, if the water is too deep, try to avoid using it. Avoid the battery plug, etc., from touching water and burning the remote control car. Question: How long is it usable until the charge? This is the Wltoys 124019 Brushless set, it includes the Upgrade Brushless motor, ESC, Motor gear, Receiver Board, and the Transmitter, its speed is about 70km/h. It can run so fast very strong power with a long time, not like the Brushl version.The Brush version can only run 8-15 minutes. Even if you run long with a Second battery, the Brush motor will burn. And this upgrade parts can perfectly solve this problem. It can make your Racing Car run more time and The brushless motor will have more Service life. Total you need buy as follow:I have not gone with a brushless motor the same size as the brushed 550 (3650, 3652, 3660) as these are really only suited to speed runs - see my speed run build guide if that is the kind of build you are looking for Answer: about 70km/h These Parts are used for the EXPLOROR WLToys 124019 RC Car Buggy, EXPLOROR WLToys 1/12 High-Speed Racing Car

English manual These Parts are used for the EXPLOROR WLToys 124019 RC Car Buggy, EXPLOROR WLToys 1/12 High-Speed Racing Car Because the remote control car is made of alloy + PA material, the whole car has first-class anti-collision performance and good internal seismic performance, which can greatly protect the normal operation of various internal circuit equipment.

One thing you can improve from a battery perspective however is making sure the batteries stay good and there are 3 basic rules for all lipo batteries: With the 124019, the extra length has been well utilised - particularly with the battery moving forward to offset the rear biased weight from the motor. Now weight split is close to 50/50 and this means it is much more balance on the straights, through corners, over jumps - everywhere. What this means in real life is that the car feels really predictable, even when grip is low. If you are wanting to upgrade or simply want to read about it, I have published over a dozen articles on 144001 upgrades which are relevant to the 124019 and will also be writing some 124019 specific articles shortly. For now, all of my 144001 articles are here:

Wltoys 144001 1/14 4WD Alloy 60km/h High Speed RC Buggy Electric RC Car ,Wltoys 144001 1/14 Parts,Wltoys 144001 RC Car Parts Product parameter A common complaint of the 144001 was that the battery didn't last long and the motor especially overheated. These issues are greatly minimised now as a result of the improved motor cooling as mentioned above, more room inside to body for cooling and of course the larger 2200mah battery included with the car which is 50% larger than the one in the 144001. This allowed me a solid 12 minutes of running on and off-road, starting with a full charged battery and finishing on an acceptably safe 3.7v per cell. This remote control car is full-scale remote control, and the remote control is strictly controlled according to the ratio of 1/12. He will move as much as you remote control the fuel range. Truly accurate remote control. You can experience the fun of racing more realistically. This remote control car has a total length of 35.6cm, a width of 20.8cm, and a height of 12.3cm. The outer color box size is 45.6*22.7*14.1CM. Choose a tie-rod you wish to adjust and remove it. You'll see the rod is asymmetrical - the plastic cup closest to the hole is reverse threaded and the one farthest has a regular thread. Use this knowledge to shorten and lengthen as needed. Always try to make sure you adjust both ends by about the same amountAnswer: This upgrade Brushless set we have test ,we suggest use 2S battery , if 3S battery will too hot ,and the motor or ESC maybe burn 3) Max speed for this upgrade Brushless set ? Upgrade 2.4GHZ Receiver + 2.4GHZ LED Transmitter (This upgrade Transmitter and Reicer board must be used together. ) The original remote control car comes with a lithium battery inside. It has been installed in the remote control car, you can directly connect and use it after receiving the goods. Question: what spare batteries do people recommend for this car. This car is really great for boys who like to play with cars. First of all it looks cool. The car body is heavy. The controllability is not comparable to that of the remote control car that ordinary children play. The main boss is also very good. Product accessory details: manual, charger, small cross sleeve Product function and feature introduction:<