The tip and cap are removed. By inserting a nail into the holes, the retainer is unscrewed. If there is not enough hand effort, add a nail or a screwdriver in the form of a lever. Lubricate the threads with penetrating grease.

Grinders are handheld power tools that are used for grinding, shaping and polishing a wide range of materials such as concrete, metal, and stone. A grinder has a motor that drives a spinning abrasive disc or wheel with grit particles on it. When applied to a workpiece the rotating disc removes material to create the desired shape or surface. Types of GrinderThen place the tip of a thin chisel at an angle to the hole of the flange nut and gently tap the entire surface of the hole with a metal hammer.

Connect the grinder to the spindle shaft for 30 seconds at maximum speed. If the disc rotates freely, without beating, without touching the protective casing, you can start working. Remove the old disc from the spindle shaft. Install a new disk. Fix it with a nut by hand or with the same universal wrench. Newbies in working with angle grinders mistakenly believe that if the stopper is broken, it is almost impossible to unscrew the nut. However, this is not the case. You don’t even need keys.If you run your fingers along the edge of the disc and it is very smooth, it is a symptom that you need to change it. To the touch it must be rough and therefore abrasive and maintain its cutting property. CanPlayersResetKey": 1 // 1- this allows players to reset their own vehicle's key. can be useful when trading to invalidate any old copies. Put 0 if you don't want your players to have this ability