I think long term, it will be better to move away from that system. Manual configuration file changes were unsupported, poorly documented, and your changes could be removed with firmware updates. Ubiquiti has promised full feature parity (and more!), but we will see. It will take a lot of development work to get parity with the officially supported USG features. Throughput Details

Enterprise models have higher PoE budgets, faster interfaces such as 2.5 Gbps RJ45 Ethernet, and the features available in the Pro models

Ubiquiti USG-PRO-4 Broadband Routers

In the interim, I would suggest that Ubiquiti use the Cloud Key Plus 2 to calculate speed tests, rather than the running the test on the USG. NOTE: When editing this customjson file, it is not necessary to include everything. You must only include the complete "path" to the items you have edited, anything outside of the path can be omitted. This article is not applicable to the UniFi Dream Machine models, because all configurations are already available in the UniFi Network user interface. The pro models have lots of PoE, support redundant power via the USP-RPS, and have some limited L2+/L3 features like static routing and a DHCP server

Ubiquiti Support cannot assist in the creation of the config.gateway.json file nor will assistance be provided for command line configuration. If assistance is required, feel free to visit our Community to create a topic and ask for help with your desired configuration. We require this information to understand your needs and provide you with a better service, and in particular for the following reasons: Before customizing firewall or NAT rules, take note of the rule numbers used in the UniFi Network Firewall.Default firewall rules start at either 3001 or 6001, and NAT rules will also start at 6001 (which don't overlap with firewall rules). The custom rules created in the config.gateway.jsonfile cannot have duplicate rule numbers with the existing rules in the USG, or there will be a provisioning loop. It is recommended to put custom rules before the existing ruleset, as the lower number will win between two matching rules.One potential problem with the UXG-Pro is the current state of the UDM-Pro and UniFi OS. Some features on the UDM-Pro are not working, incomplete, buggy, or just missing. Development for the Dream Machines has been steady, but after 9 months, the UXG is still on on beta firmware version 0.5.0. Gigabit routing is no issue, but firewall and encryption speeds are limited, with slightly higher limits than the USG.

as noted by many other consumers, there is the persistent, loud, high-pitch fan noise. Even though our switching gear is in a closed data closet, I can hear the USG Pro 4’s fan noise upstairs in my study. Resets to factory defaults. The UniFi Gateway should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the right LED on the WAN2 port starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Gateway will automatically reboot. we replaced five legacy passive switches in our network with six 8 POE-60W actively managed switches, and Basically a UDM with an upgrade to Wi-Fi 6 on 5 GHz, two PoE ports, an SD card slot, UniFi Protect support, and 128 GB of internal storageYou may choose to restrict the collection or use of your personal information in the following ways: