Below are some of the models 3D printed with the Creality LD-002H for you to see what to expect from the printer. LD-002R 3d printer can remove part of the stench of exposed resin from the air. LD-002H resin 3d printer upgraded its air filtration system with activated carbon, so it can effectively reduce the odor and impurities and more environmental-friendly.

If you're new to resin printing, you might be wondering what some of the terms in the spreadsheet mean. So the LD-002H resin 3d printer adopted 1620*2560 higher resolution with higher precision. Now the machine is able to manifest every detail of the model to us. This satisfies your needs for higher-quality products. Here comes the good news. The new print LD-002H adopts an upgraded UV Light Source Module and an upgraded transmission system. Compared to the LD-002R resin 3d printer, it greatly improved the stability of the light source and the success rate of printing. This LD-002H is still equipped with a charcoal filter to reduce the diffusion of resin odours, a graduated VAT, a maintenance hatch on the side for easier screen replacement, and the power button on the front. The Creality LD-002H has been equipped with a robust monochrome LCD screen that, compared with its RGB analogs, offers four times their service life and is considerably less power hungry.The Creality LD-002H is a neatly-looking desktop 3D printer with a rather small footprint and a refined, futuristic appearance. Its outer dimensions of 221 x 221 x 403 mm (8.7 x 8.7 x 15.8 inches) and weight of just 6.5 kg (14 lbs) make it a perfect fit for any table, while its authentic appearance completes the scenery and makes it a fine addition to a home workshop or office. You can search the table for a certain property you are interested in, such as "red" or "flexible." You could also try looking for a resin with a low curing time, or one with multiple upvotes. Z-axis Linear Rail: The linear rail provides a much stronger structural mechanism for the Z-axis, resulting in better, more refined prints.

If you don't think the listed settings are correct, you can press the minus button, and Suggest a change in the parameters. Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems. LD series specializes in resin 3D printing, and they are usually applied to the manufacturing industry because of its high precision. The temperature of your resin should be at a minimum of 20°C when printing, and ideally over 25°C. You can either make sure your room temperature is within this range, heat the printer or pre-heat the resin before pouring it into the vat.The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.

NEW ITEM: Hi-Res 6.08” 2K monochrome screen: The Creality LD-002H utilizes a 1620*2560 monochrome LCD for layer exposure. Not only does it increases print speed up to 200% or more, but the life of the screen is increased by up to 400%. While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities. Air Filtration System with Activated Carbon: Activated carbon can effectively reduce the emission of the odor from resin and is more environmental-friendly. Besides, it features an upgraded UV light source module and improved transmission system for superior light permeability, which greatly reduces the printing time and provides a more uniform light exposure of 8000uW/cm², increasing the printer’s performance while providing you with a smooth and reliable resin 3D printing experience.Upgraded UV Light Source Module: The Creality LD-002H is equipped with a UV integrated light source, providing improved light transmission. The UV light achieves 8000uw/cm². A consistent UV light source is the most important factor in printing. You can think of it like a bottle of pulpy orange juice. You need to shake it well to get all the juicy bits that have sunk to the bottom. You might know that resin is cured using light, not heat, but a certain degree of heat is still an important part of the reaction. It is similar to how sugar or salt can dissolve in cold water, but hot water makes them dissolve much faster. Have you ever encountered this situation: You are in a hurry to print a model, but you failed to print it several times. Unsuccessful printing not only discharges many users but also waste our materials. The printer can be controlled via an easy-to-use 3.5-inch touchscreen with a neatly-looking UI that offers a crystal clear logic behind the menu options. The touchscreen displays all the relevant printing information in real-time, making it an indispensable tool for effortless standalone operation. Besides, it lets you always stay on top of the printing process and helps adjust necessary settings when needed.