It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the AZ-EQ5 type mount. I have never used a track before, and thought that this would be a good way to line up router-cut dados. Once the Zygo test report has been completed, the optical alignment is thoroughly tested and tuned to ensure they are spot on before they leave us.

Right side up or upside down, just release the pressure, change parts or position and pull the ratchet lever to reset the clamp. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. And now, with the launch of the MatchFit Ratchet Clamp AP by Microjig, it’s time to bring your craftsmanship into the future. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Now you will no longer need to replace the plate of your optical tube, so your HEQ5 will be universal like the most expensive and higher payload mounts!It expands creative freedom to build extension fences, tables, workspaces, and personalized track systems.

In a testament to versatility, the MatchFit Ratchet Clamp AP is seamlessly compatible with the MatchFit System. This is a cheaper and much quicker alternative, and you can easily put dovetail slots in any wooden surface you need to clamp to. This dovetail clamp has been designed for the ASIAIR PRO to connect it to your telescope's Vixen-style dovetail bar, so that the ASIAIR PRO will be hanged down from the bar. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH).Versatile Capability: With a 7-inch clamp capacity and a deep 2-1/2-inch throat depth, the MatchFit Ratchet Clamp AP broadens your project possibilities, accommodating various sizes and types of workpieces. To the eye they look very very similar, but when you attempt to insert the Matchfit clamp into the underside of the Festool track, it goes in partially (almost to the shoulder) and then stops.

The operation is very simple, just remove the original flange, acting on three small threaded dowels and entering our flange. Does exactly what I needed - sticking a small dob onto a camera tripod for a youngster who's showing real interest in the stars.All relevant health and safety practices should be used which are applicable to your country of residence. They provided an excellent and friendly service as per usual (I genuinely can't recommend this company enough!

You will also be able to experience these versatile hold-down clamps for any table saw sled and woodworking applications.Once the measurement has been taken, we are provided with a series of results that show the optical quality of the surface plus other information. The MatchFit Ratchet Clamp AP embodies our relentless commitment to pushing the boundaries of what’s possible in woodworking, setting new industry standards in performance, adaptability, and ease of use. The Observatory version of PLUS dovetail clamps is 280mm long and it comes with 4 locking blocks to safely lock even large telescopes.