Now that we know which components we’ll use, let’s look at the tools we need to create our biltong box. We need a drill and hole saws to make the ventilation and fan holes. Now you can add the glass door to the cabinet by sliding it into the hinges. Take your flat-head screwdriver to gently secure the glass door with the screws on the inside of the hinges. Place the left panel on the left side of the bottom panel and the right panel on the right side. In a later step, we’ll construct the cabinet by placing the left en right sides at a 90-degree angle on the bottom panel’s plastic dowels.

Make sure to cover the ventilation hole completely. Add some pressure to the fan to secure it. Feel free to add some extra glue to the sides. You can cut away the excess mosquito net when the glue is dry. 4. ADD SOME FLAIR 4.1. Add Led Strip I apply one of my bbq rubs, but choose whatever herbs/spices you have at home, or prefer. Apply the spices/rub, and leave it in the fridge (covered) for a few hours. You want to give the rub some time for the flavors to blend before starting to dry the meat. Hanging

Light bulbs aren’t needed in most cases

Heat vs airflow– which matters most in your biltong box? it’s a question we’re often asked. Airflow will always be the most important thing to consider in your biltong dehydrator- but the answer can get a little complex. Let’s take a look at some of the factors you need to consider. Making biltong the right way is about as loud as the sound of a whisper, so deducting a whisper amount from a very loud belt will not stop you from being heard. It's more like the difference between a loud and semi-loud voice. So turn the panel and use the small hole to align your hole saw from this side; gently start drilling again until you feel you got through. Fun video: we also made a timelapse of biltong drying in our DIY IKEA box! 1. BUILDING NECESSITIES 1.1. Components Are you looking for a way to dampen the sound of your loud singing as you practice? Or are you looking for something to scream in when you've had a long day? The BELTBOX is a product that was made just for people like you and me.

While it may seem annoying to do, leaving an apartment or shared living space to sing in your car is still a better option than singing into a pillow or not singing at all. Once they are in place, take the left panel and mount it on the plastic dowels of the top panel; in this step, make sure you also add the wooden dowels into the foreseen holes of the left panel. It also doesn't muffle your sound so much that it makes you sound weird like bane or anything, so you will still be able to hear yourself pretty well. The Product Is Simple To Use With the glass door installed, you already have a good-looking biltong box in front of you. As we don’t want insects intruding on our cabinet and feasting on our meat, we will install some corner profiles to close the gap between the glass door and the inside of the cabinet.Now take the bottom panel and ensure the ledge corresponds to the other panels’ ledge. Next, align the plastic dowels of the bottom panel with the side panels and push the bottom panel down. Start by measuring the corner profile for the top. This profile only needs one side miter saw, as the other one will connect to the cabinet door’s top hinge. So we measured and put two marks at 29.2 cm or 11.5 inches and drew a line between these marks to see at that spot. Make sure you see the measured and indicated spot from the previous step. Now we’ll take our drill, with the hole saw attached, and align the drill point with the measured spot on the panel. Here you can see the lengths we need for the corner profiles; we will miter saw them to fit them nicely.

To add some extra flair to our box, we‘ll add some LED lights. You have a couple of options; the main choice is, do we add a battery-powered LED strip or a mains-powered LED strip? The battery-powered version is the easiest; you can attach everything inside the box without external wires.But first, we’ll have to drill an extra hole to fit the power cable for the mains-powered strip. We’ll drill the hole on the same side as our fan to keep all wires together.