It's recommended to place container in a room at around 15 degrees C for 24 hours prior to use particularly when using low pressure equipment for spray application. These same molecules arrest and prevent corrosion even on already rusting surfaces, providing amazing self-healing properties if the film is damaged. When I last did undersealing I went a bit OTT, firstly I sanded/removed as much rust as I could, then applied bilt hamber 'deox gel'.

Your other option is to carefully remove the loose stuff (be careful not to score good steel) and then apply Hydrate 80.Dynax S50 seeps into welded seams and seals surface defects, forming a soft, brown, wax-like film that self-heals when disrupted. dynax S50 has been used with superb results to protect voids and cavities in steel boats, vessels, off shore installations and other steel structures subject to severely corrosive atmospheres. You get to do the wheels properly (I think that Nick at pro Detailing has used Auto-balm on his wheels, and I'm looking forward to his comments). Single 750ml aerosols are supplied with one injection lance, multiple aerosols will be supplied with one injection lance for every two aerosols. dynax S50's soft-film is optimised for enclosed cavities where extremely corrosive conditions develop.

Come join the discussion about methods, materials, equipment, restoration, classifieds, troubleshooting, and more! The pressurised giant-sized Dynax-S50 aerosol dispenser accepts interchangeable heads: The 60cm cavity injection lance has a precision fluid-tip to deliver, at high-pressure, a dense, finely atomised circular mist of Dynax-S50 ensuring 360 degree coverage of box sections and cavities. The aim of the test was to see how 7 metal panels faired using 7 different wax coatings in a Salt Spray Cyclic Chamber, which rapidly accelerates corrosion.

I always spray too much in and then catch it from all the drain holes in old ice cream tubs, which you can then use to brush on. Dynax-S50 contains highly polar corrosion inhibitors that are able to displace surface moisture; very wet surfaces should be pre-treated using Bilt-Hamber ferrosol.