PNS shows that is cannot communicate with IP of the NMC on either port 80 or 443." Did you mean to say the PCNS can communicate on either port 80 or port 443? If it cannot communicate on either of those ports, you want to make sure any firewalls you have are open on those ports in both directions. Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP) server to provide the network (TCP/IP) values of the NMC I don't really see anything that suggest this is a authentication error at this point of the process, it seems to fail before it ever tries to authenticate. WARNING!- Connecting anon-APC serial cable to your devicecan causeunwanted, erraticdevice behavior. Device When you log on as Device Manager (equivalent to Device User in the user interface), you can access the event log, configure some UPS settings, and view the number of active alarms.

Connect the provided serial cable (part number 940-0299) to the selected port at the computer and to the configuration port at the Management Card. To detect internal problems and recover from unanticipated inputs, the Management Card uses internal, system-wide watchdog mechanisms. When it restarts to recover from an internal problem, a System: Network Interface restarted event is recorded in the event log. Network interface watchdog mechanism Have you tried rebooting the card itself and not just the UPS? The card has a reset button on it. If you press and hold it with a straightened out paper clip for about 10 to 15 seconds that will reboot the card. Sometimes rebooting the card is necessary to access it. Thanks for reaching out. I am attaching the link to an APC forum post which will hopefully resolve this for you. Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file

DHCP/BootP andretry optionsare only available in NMC2 AOS 5.0.X. It is no longer an option in AOS versions > 5.0.X NOTE: This method can be used to configure the embedded UPS NMC2 or optional secondary NMC2 for SRT models. Description: Configure the command line interface prompt to include or exclude the account type of the currently logged-in user. Any user can change this setting; all user accounts will be updated to use the new setting. PowerChute Network Shutdown — Provide unattended remote graceful shutdown of computers that are connected to UPS devices This document provides a high level overview of APCNetwork Management Card's and their support for Simple Network Management Protocol.

Devices with an embedded Web/SNMP Card include (but are not limited to): Environmental Monitoring Unit 1 (AP9312TH) The default values for these three settings generally do not need to be changed: -v : APC printed format and on the Network Management Card Utility CD in PDF to configure the TCP/IP settings of theAt the command line interface, use commands to configure the NMC. To use a command, type the command and press E NTER. Commands and arguments are valid in lowercase, uppercase, or mixed case. Options are case-sensitive. You can use a local computer that connects to the Management Card through the serial port to access the command line interface.