Change the location for setting up the smart device to reduce the possible interference in the same frequency band at the original location (to avoid interference from devices such as Bluetooth, USB 3.0, microwave ovens, ZigBee devices, etc). A: Yes, go to your camera’s live view and look for the record button. Tap once to begin recording. Tap again to stop. Power off the device for few minutes, then power cycle and reset the Tapo Cam, ensure its LED blinking red and green. Otherwise, reset it by pressing and holding the RESET button for over 5s until the LED blinks red. Note: The location permission is needed to find and connect to your camera during the setup. Grant the location permission when prompted and you can disable it after the setup.

Coyle added; “The east Hull gym is at capacity, but if I can remove some of the adult classes down the line and move them to a new TC60 gym in east Hull then that enables me to put more kids classes on and make that east Hull gym a pure boxing gym where we try and bring on young kids. A: There is no quantitative limit on the cameras that can be set up or controlled by one account on the Tapo App, however, Tapo Care is only available to a maximum of 10 cameras on one account. If you would like Tapo Care for more cameras, you will need another account. A: Tapo cameras can be used when wireless is offline or unavailable. However the cameras will require to be initially set up and configured with a Wi-Fi connection. You will also have to have 24/7 recording enabled with a MicroSD card inserted and formatted. Q1: Can we change the video quality of the Tapo camera when watching the video with Echo Show or Fire TV?A: Due to the limited hardware performance of the camera itself, Tapo Care works best with one of the NVR or SD card recordings. Most importantly, however, the actual streaming experience would be affected by the surrounding wireless interference and the signal strength, even when the bandwidth is enough. In this case, it’s suggested to eliminate possible wireless interference (like Bluetooth devices, USB 3.0 devices, cordless phones, and microwave ovens) or place the camera closer to the router. Grant the location access and allow the location permission to find and connect to your camera. You can disable it after the setup. Then it will start looking for your camera.

A: Unfortunately, it doesn’t support turning on/off the camera on the Tapo App at present. If you want to turn on/off the camera, you need to switch it off manually or you may just plug the camera into a smart plug like Tapo P100 and set a schedule to turn it on/off automatically. A: Tapo offers two recording options MicroSD local storage and Tapo Care cloud storage. Local storage is stored to an inserted and formatted MicroSD card, and Cloud Storage is stored on our secure cloud servers. Viewers worry Tommy Coyle sounded 'punch drunk' in interview - but he says it was just his Hull accent Go to your phone's or tablet’s Wi-Fi settings and join your camera’s network: Tapo_Cam_XXXX. Then return to this APP.and data may be at risk" with 2 options: Disconnect or connect anyway, don't worry about it, just select "connect anyway", then continue the setup. A: The Tapo Cam has an LED on the front, you can know the current status of the camera from the LED. Or users may use third-party software to view and manage the camera, and here is the detailed instructions. How to configure the Notification feature for the Tapo & Kasa devices on the Tapo app 09-20-2023 7097 But please note if your Tapo cameras have already been bound to the previous account, you will need to remove those cameras first from the old account and bind them to the new one, here is the guide for unbinding them from the old account.