Joined in 2023 
82 
63 About this deal
Traditional dimmers are only designed to work with incandescent lights, although some also work with halogen, while LED dimmers are designed specifically for LED bulbs. “Traditional dimmers, which typically use knobs, usually absorb the energy not sent to the light,” says Sampayo. “For instance, if you dim your light to 30 percent, the remaining 70 percent is wasted by the regular dimmer in the form of heat. Your energy consumption remains at 100 percent.” That works with incandescent lights that exhibit reduced brightness when provided with less energy, but LED bulbs placed in that same situation won’t light at all, or may exhibit unwanted behaviors. The most important requirement when installing a dimmer switch is a neutral wire, because a lot of modern dimmers require a neutral wire. Homes built prior to 1985 typically won’t have a neutral wire unless the wiring has been updated and brought up to code, so this is an important consideration. It’s important to note that non-dimmable LED lamps and light fittings cannot be dimmed. Any attempt to use dimmer switches with these non-dimmable LEDs could result in damage to the dimmer, lamps, or both. Dimmer switches allow you to adjust the brightness of light bulbs. They adjust the amount of voltage that reach the bulbs. So, for example, the more voltage the bulb receives, the brighter it will be. What to Know Before You Get Started
Read on for an overview of what to keep in mind when choosing the correct dimmer switch for your home. Varilight V-Pro 120W LED 1 Dimmer Switch
Similar products
The Cloudy Bay in Wall Dimmer Switch for LED Lights is a toggle switch with a small dimming slider, and it functions in both single pole and 3-way installations. The dimming slider is a little on the small side, but it doesn’t get in the way of the switch. It’s fully compatible with all Cloudy Bay LED light fixtures right out of the box, and it also includes a trim dial that allows you to adjust it to work well with other fixtures and dimmable LED bulbs. It comes with everything you need to complete the installation, including screws, wire nuts, and even a decorative wall plate. They are commonly used to dim most electronic low voltage transformers (ELV) with capacitive loads on the primary circuit. Trailing edge dimmers can also be used to dim incandescent, halogen and LED lamps effectively. They should not be used on older type of magnetic core and coil wire-wound or toroidal transformers. Choosing the correct dimmer switches for your home may seem like a simple task, but homeowners need to be aware that there are specific types of dimmers for different types of light bulbs. Knowing the difference between leading-edge and trailing-edge dimmers is essential for choosing the right product for the light fitting and bulbs that you have. This will also ensure that your lights work for as long as possible, the switches or fixtures don’t get damaged, and that energy consumption is kept as low as possible.
Intelligent Features: Best models feature soft-start and overload protection, which helps improve the lifespan of both lamps and the dimmer switch. These ‘intelligent dimmers’ can protect themselves from failure by turning down or off the lights when too many lights or transformers are mistakenly connected. Dimming fluorescent fittings is complex and can involve analogue or digital dimmers and a variety of different wiring schemes. These are expensive to install and are mainly used for commercial applications and are beyond the scope of this article. The Kasa app works with both Android and iPhone, and it allows you to operate the switch remotely as long as you have internet access, so you technically don’t even need anything but this switch and your phone to get started. It does work with both Alexa and Google Home though, so you can operate the switch with voice commands if you have a compatible smart speaker. Smart home integration also lets you include the switch in daily routines, like turning the lights on or adjusting the illumination level at dusk. Adding a dimmer switch to a lighting setup, or replacing an old one with a newer model, can transform the look and feel of a room. “Dimmers are most useful in areas where you want to create ambiances, such as social areas, bedrooms, hallways, and bathrooms,” says Freddy Sampayo, chief technology officer of Schaller Tech. “It's also useful to think about spaces where you'd be annoyed to turn on the light when waking up groggily in the middle of the night.”
How can we help you today?
These wattages must always be adhered to and in the case of halogen lamps and capsules must be over-rated by at least 25%. GU10, G9 and GZ10 halogen lamps and capsules tend to arc in the latter part of their life. This is not dangerous in any way and is a characteristic of halogen lamps. This arcing creates an additional load on the dimmer and can overload the module resulting in excess heat and premature failure. The first indication of this happening is an increase in noise, often heard as a buzz from the dimmer switch. Cost Savings: By curbing energy use and reducing the frequency of lamp replacement, dimmer switches can lead to substantial savings, making them a financially smart choice for your home.
Reduced Eye Strain: By enabling you to tailor the light level, dimming lights can help minimise eye fatigue, especially during prolonged periods of close-up tasks such as reading or crafting. As an example, four 5w LED lamps in a compact room will only total 20w, while a 250w dimmer switch requires a minimum load of 25w. In this case, the dimmer switch simply won’t operate. Therefore, a low-load dimmer switch rated at 5 – 50w would be more suitable in such circumstances.
£140.00
Intelligent Features: Best models feature soft-start and overload protection, which prolongs the lifespan of both lamps and the dimmer switch. These ‘intelligent dimmers’ can protect themselves from failure by turning down or off the lights when too many lights or transformers are mistakenly connected. Dimmers work by simply reducing the voltage supplied to the lamp, which in turn reduces the light output from the light bulb. There are many types of light bulbs and capsule lamps that can be dimmed but the requirements for each type can vary. If you select the wrong type of dimmer it may not work, could lead to reduced lamp life or even blow the dimmer or light fitting in extreme circumstances. Benefits Of Using Dimmer Switches In Your Home
On the other hand, mains voltage dimmable LED light bulbs and LED light fittings can be comfortably controlled using standard resistive dimmer switches. LED lamps are particularly appealing due to their low energy consumption and high energy efficiency.
These dimmers are designed to endure the rush of a current that transformers typically produce during operation, providing a stable and reliable dimming solution. To accomplish this, inductive dimmers are already over-rated, meaning they have a higher VA rating than the wattage of the connected load. This over-rating allows them to cope with the inrush current without compromising the performance or lifespan of the lighting scheme. By adding additional Leviton Decora Smart Dimmer Companion switches, you can set up virtual 3-way, 4-way, or even 5-way control over your lights. The primary switch has to be wired to the lights like a traditional dimmer, but the companion switch can be placed anywhere and doesn’t need to be connected to the main switch by physical wires. The connection is achieved wirelessly through your Wi-Fi network, so you do need to have Wi-Fi to use this kit. It works with Alexa, Google Assistant, and Apple HomeKit, so you can also use it to operate and dim your lights through an app on your phone or voice commands. Common Uses For Trailing Edge Dimmers: They are often used to dim electronic low voltage transformers (ELV) with capacitive loads on the primary circuit. Additionally, trailing edge dimmers can effectively dim incandescent, halogen, and LED lamps
Related:
Great Deal 
New Comment