This process can be applied to a small area of a car, such as a wheel arch, or it can be applied to much larger surface areas. If the latter is the case, then tcut will need to be applied all over, one panel at a time, and will requires several containers of tcut to ensure you have enough of the compound. If, for instance, you want to restore an old paint job all over a car, the process is the same as with a smaller area, but it is a more laborious job. Every panel will need to be treated, one panel at a time, to ensure an even application. The maintenance afterwards will also be more intensive, since the car will regularly need to be waxed all over. T-Cut After Care Step 5: Due to the T-Cut remove the protective layer that coats the paintwork. It should be a priority to regularly wax the vehicle, to avoid it dulling and corroding. T-Cut Colour Fast – Removes minor scratches, scuffs and marks, all whilst adding colour, in one simple application.

Not all surfaces are made equal. T-Cut Solution works best on metal surfaces and paintwork with a glossy finish. Using it on matte paint finishes or non-metallic paintwork can cause more harm than good. Time is of the Essence

T-Cut Colour Fast Scratch Remover - Blue

T-Cut is a type of car scratch remover, that is also known as a rubbing or cutting compound. A well-known brand in the car care industry, T-Cut is used to remove light surface scratches, marks and scuffs on car paintwork. There are several different types of T-Cut available, including the original restorer fluid, rapid scratch remover, T-Cut Colour Fast, the T-Cut Scratch Magic Pen, and a T-Cut metal polish. Does T-cut actually work?

The best car scratch remover for you entirely depends on what kind of scratch you’re dealing with. Scratches can be deep, cutting through the primer and into the metalwork. Some take the colour, while other more shallow scratches affect just the clear lacquer layers.Each product has its own instructions, which are worth reading carefully before starting. Generally though, you need to wash your car, or at least the area of repair, thoroughly. You also need to ensure you’re applying car treatments in the shade. Whether it’s wax, polish or scratch remover, standing out in the midday sun will inhibit the product’s ability to function properly. Where tcut is not suitable, however, is with deeper scratches where it is far less successful, or even places where the car has been dented as well as scraped. It should only be used to rectify light, shallow, surface scratches where T-Cut can be most effective. Keyed car scratches or deep scrapes from a wall or kerb can often be too deep, going all the way down to the basecoat or primer layers of the car paint, for a simple cutting compound to fix. Where this is the case, a stronger method of scratch removal may be needed, and we’ll talk more about this later. How Does T-Cut Work? The next step is to put on a pair of gloves and apply tcut to a clean cloth – something without fluffy fibres. The reason for this is the fibres can break off into the T-Cut solution, and this can also mark the paint. Applying T-Cut When using T-Cut, safety should be your priority. Always ensure you’re in a well-ventilated area and wear gloves to protect your skin. Common Mistakes to Avoid There are, without a doubt, a few places where tcut can be a useful tool for car owners. Where T Cut can be used on all types of car paintwork, no matter the type or colour of the car, it is more versatile than just being restricted to automotive vehicles. T Cut, as a compound, can also be used on caravans, boats and even around the home to help remove scratches. Furthermore, as well as a car scratch remover, T-Cut is used by some as a cleaning process to help restore vehicle paint. Similar to when you polish car scratches with a coloured car polish, T-Cut helps remove minor imperfections from the surface of your car.

Step 6: If you feel your whole car needs a paintwork restoration. You would have to ensure you are ready for the lengthy and strenuous task, as each section of your car would need to be treated separately. Also, it would require a more thorough after-care. The whole car would need to be waxed to prevent the paint from dulling. It’s vital that all excess fluid is removed before finishing the job. If too much is left on, or the incorrect colour has been applied to scratches, it can be extremely difficult to remove. Applying T-Cut is a time-consuming process and requires additional care afterwards. If the application of T-Cut is rushed then it can lead to more expensive repairs later on down the line. Common Questions Is T-Cut safe? Deeper Scratches: Whilst it is good for slight, surface scratches, it’s not as suitable for scratches that are deeply ingrained in the paintwork, either accidentally created by scraping against a wall or curb, or deliberately caused by a vandal (if your car is ‘keyed’). Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution.

Have you ever walked past your car and done a double-take because you’ve just noticed a scratch? And then you frantically rub over it, hoping it’s just a dirt smudge, but it remains. The most honest answer is: with difficulty. Whether someone’s caught your car with their coat zipper, scratched it by squeezing by or you in their car, or whether you’ve had an altercation with a bollard, deep scratches are hard work. Have you found a few scratches on your paintwork that you’re itching to get removed, but don’t have the time or confidence to do yourself? Get in touch with Bodyteq today for a free estimate.

From T-Cut Rapid Scratch Remover for light scratches to T-Cut Metallic Colour Restorer for metallic paintwork, the selection is abundant. Choose the one that matches your specific vehicle needs. Safety FirstStep 1: An important action to ensure you carry out, is to thoroughly clean and dry the area of paint you are applying the T-Cut to, or else it could potentially damage the paintwork.