The staff was very helpful and efficient The snap caps were used to cover the screws which hold the toilet down and were just what was required. Excellent job I need a method to cover screws for a high end client at a blue chip event and Snap-caps fitted the bill perfectly, not only was the product great the range of colours gave a perfect finish. The only problem i have was deciding what shade of blue to choose!!!!!! The Crown: Bifix caps utilise the same low-profile crown used on Stemfix caps. This means the cap is less noticeable and importantly, when the cupboard is being washed or wiped clean that cloths won't snag on the edges of the caps.

This effect can be easily confirmed, by examining vehicles that use hinge-caps over the number-plate fixings. Even on cars less than 6 months old, zinc-coated screws will show signs of advanced corrosion. Fitting the Cap to the Washer may require more force. It may also result in a white 'stress' ring forming around the perimeter of the cap. The white ring may disappear over time, especially if the caps are warmed up. In a climate such as the UK’s, this means the screw-head is continually in water & oxygen environment, never getting to dry out properly. This can cause the fastener to corrode (rust) up to 20 times faster than if a cap had NOT been used! The Stem: Bifix caps have a patented stem, incorporating 16 tiny wings, or splines. When aligned properly in the screw-head, the splines push against each other, and against the walls of the central (circular) part of the drive recess, rather like tiny springs.We needed some screw caps to match some pre-finished timber products. With their help on the phone we found the closest match to our RAL code and when received they were perfect. The customer service saved us a lot of time and hassle and saved us buying several colours which wouldn't have been needed. many thanks This was a great fast service.Staff were helpful to match up the coulours with our sinage. Lots of choose. Nobody wants to look at screw heads on their new sign so these provide the finishing touch leaving a professional looking installation. Fantastic range of colours to suit most jobs. Great customer service and speedy turn around. Because they are UV-stabilised and completely seal the head of the fixing, Snap-Caps are ideal for exterior as well as interior applications. Even in extreme environments, Snap-Caps can be expected to last for 10-15 years, all the while protecting the screwhead against corrosion. Ensure you are using the correct-sized Snap-Cap for the fixing. Some imported fixings may not conform to British or EU standards, and the heads of the fixings may be up to 40% oversized

The Snap-Cap washer is available to suit either Countersunk screws, or for any of the ‘Flat-Bottom’ fixings (such as pan-head screws). Using the correct washer type will support your fixing properly, giving improved clamping performance and prevent the screw distorting the washer - crucial to why genuine Snap-Caps are the ONLY cover caps that COMPLETELY seal the head of the fixing. How to use Snap-Caps The range of colours and quality of the snap caps is only bettered by the service offered by the team. Excellent, good quality product, which are so easy to use and really finish the job off nicely. Excellent service always provided, the caps always arrive next day with out fail. The fixings you are using are too large for the Washer. This prevents the Washer from flexing as the Cap is being pushed on. From start to finish the service was professional, prompt and friendly. The Snap-Caps will definitely be regular additions to the signs we produce, as they give the 'attention to detail' finish we really care about.Rather than making a cap (like everyone else) that doesn't work, Pro-Dec set about a radical re-design: Very good product , i use these for all our hoarding projects. Very good customer service, very helpful and Professional. Recommended. Ensure you are using the correct Washer type for the head of the fixing - you MUST use a CSK Washer with Countersunk-head fixings, and F/B Washer for all "flat-bottomed" fixings such as pan-heads, flange-heads etc. Due to the range of colours and finishes available in the Caps, and the different styles of Washers available, Caps & Washers are priced and sold as separate items. Trade Prices are from:

You are not using the correct technique to fit the Cap to the Washer. Because Snap-Caps are designed and moulded to very fine tolerances, the caps cannot be pushed on "flat". Do NOT hit Caps with a hammer (or similar) - it will cause the Caps to split Electrical and signalling control boxes and panels (Snap-Caps are an excellent way to insulate fasteners) This guarantees a good grip in both Phillips and Pozidriv screws, even when screws are out-of-tolerance, burred and damaged. In fact, this makes Bifix the best ‘Pozi’ cap available – part of the reason Bifix is the only ‘Pozi’ cap to be granted a patent in the UK. Most 'star' caps rely on an interference (or friction) between the sides of the driver recess and the 4 'wings' of the stem of the cap. Great to see such amazing customer service in a society where this has become increasingly rare. Fantastic product too - they seemed to be the only company that I could find with ease online, that offered Bifix Poxi Caps with a colour-match option. Can't recommend highly enough.

The colour matches available are superb and match the majority of the Egger board range. One thing you can be assured of is that you will never get a call from a client complaining that the screw caps have fallen outt While all care possible has been taken in tabling this data, we accept no liability for any inaccuracies, omissions or currency of information contained herein.