The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you.

Measuring 480mm x 600mm x 720mm, it is suitable for open-frame printers such as the Ender-3, Ender-3 Pro, Ender-3 V2, CP-01, and others.

Creality produces three different versions of the Ender 3, and it can be tough to decide if the upgrades on the newer versions are worth the additional cost. If you are looking for something that can print larger parts, we recommend that you take a look at Creality’s CR-10 series of machines, which have a larger 300x300x400 mm build volume. Now all the structural parts are in place and the last thing to do would be to connect all of the electronic cables. Even though both don’t have a bed leveling probe, at least the U30 Pro has a wizard integrated that helps to to quickly move the nozzle to the leveling locations.

I've added 'upgrades' for convenience and reliability (not that I expect anything would have failed) and have run 4Kg through the machine in around a week. For example, you can prepare the FlexPlate with the right adhesive platform film so that your 3D print is always printed under the most favourable conditions with good bed adhesion and without suffering from warping or warping corners. Also as time goes on, I will probably be switching to an all metal hot end and upgrade the PTFE tube. With the Ender Extender® 400 you increase the possibilities of your Creality Ender 3 Pro 3D printer with a print platform of no less than 400mm x 400mm!Push your creative boundaries with the Creality 3D Sprite Extruder SE, specially designed for the DIY enthusiast.

I was able to easily load filament through the injection molded extruder and into the white Bowden tube.Thanks to the transmission ratio of 3:1 you can achieve high resolution prints with narrow nozzles or high flow prints with larger nozzles. Thanks for telling me about the PTFE tube, that's one of the things I was planning to do, but I didn't know it can cause issues like that. I thoroughly recommend you watch this YouTube video before you start to put an Ender Pro 3D printer together. You may notice that the Ender 3 V2 hot end looks different due to a new enclosure, but “under the hood" it is identical to the other Ender 3 models. With this original Creality Ender series display board you can replace the LCD screen of your Ender 3 or Ender 5 series printer effortlessly and without adjustments.

Adjusting the belt tension is possible on the earlier other printers, but requires holding the belts in tension while tightening the locking nut, which can be tricky and difficult to set precisely, so we consider this a reliability and usability improvement. Sometimes you need to rotate objects to get them to print the way you expect them to sit on the print bed. Compatible with the following Creality Printers: Ender-3, Ender-3 Pro, Ender-3 v2, Ender-3 Neo and the Ender-3 v2 Neo.The nozzles are made of brass, with M6 screw thread and are suitable for filament with a diameter of 1. It first happened on the Ender-3, and just a day later, I had exactly the same issue with the Alfawise. Upgrade your Creality hotend with a real Copperhead heat Break and Hot Block to stage 2 of the DDX Direct Drive eXtruder. And by the way, if you’re planning to print in ABS, an enclosure is critical since keeping a higher ambient temperature prevents parts from warping at the corners. The Ender-3 Pro uses a small radial fan to cool the part, the Alfawise an axial fan with a nozzle that I slightly had to bend into place that the flow of air nicely reached the nozzle.