d) Sliding and folding doors: – Manual sliding and folding doors are recommended for narrow spaces not heavily used by the public 3.3 Door opening Completely glazed doors should be avoided in buildings frequented by people with visual impairments. The Health and Safety Executive’s Workplace Health, Safety and Welfare Approved Code of Practice. This is necessary as the HSE investigates all accidents involving power-operated doors. Safety signs are vital because they can help to prevent accidents and injuries. They can do this by:

Doors required to comply with BHMA A156.10 include power-operated pedestrian doors, as well as doors with low-energy operators that are not operated by a knowing act. The signage requirements of A156.10 apply to swinging, sliding, and folding doors, and the signage must be visible from both sides of the door. Currently, the standard requires signage stating “AUTOMATIC DOOR” with letters 1/2-inch high minimum, although the visual character requirements of ICC A117.1 – Accessible and Usable Buildings and Facilities, require a minimum character height of 5/8-inch.

Where to Buy Office Door Signs

Room numbers should be placed on door frames and not on doors themselves so that the room number is visible even when the door is open. 3.11 Colour Automatic folding door. The main danger points are where the leaves come together – the main closing edge – and where the door folds – the secondary closing edge. Again, the use of presence sensors and limiting the opening and closing speeds can reduce the risk of injury. The profile design on the secondary closing edge can help to prevent finger entrapment. Proper signage is critical to the safe operation of automatic doors, so the signage required by the standards must be maintained throughout the life of the door assembly. For additional information and diagrams depicting the signage requirements, refer to the applicable BHMA standard, available from the Builders Hardware Manufacturers Association. For doors installed in an opening more than 0.60 m in depth, the clear door opening should be at least 0.90 m The Provision and Use of Work Equipment Regulations 1998. These lay down requirements for employers regarding the safety and use of all work equipment including machinery.

The Health and Safety (Safety Signs and Signals) Regulations 1996 (the Safety Signs Regulations) implement European Council Directive 92/58/EEC on minimum requirements for the provision of safety signs at work. This guidance is aimed at helping employers meet their responsibilities under these Regulations. Summary There are already a number of standards and codes of practice to be taken into consideration when designing and installing automatic doors. These include:

Because power-operated doors are essentially machines with moving parts, the safety of users is a key consideration. The obvious hazards are where moving parts move past fixed parts, creating the possibility of trapping fingers or even crushing bodies. a) Handles: – Lever-type handles, push plates or pull handles are recommended for swinging doors because they are easy to open. Warning people of hazards: Safety signs can warn people of potential hazards in the workplace, such as slippery floors, moving machinery, or hazardous chemicals. Warning signs can help people to take the necessary precautions to stay safe. Sliding Door Sign – Conference Room/In Use/Vacant – This high-quality sliding door sign prevents disruptions to meetings and is attractively designed with a gold or silver-finished aluminium frame. Customisable to match your corporate colours, it can also say ‘Meeting Room’, ‘Training Room’, etc. Accessible doors should be so designed as to permit operation by one person in a single motion with little effort.