I'd go for TT600 + TT600 and if you don't have enough power add another TT600 and use two of them firing into your softbox. The flash unit has built-in 2.4G wireless transmission, which can be used together with X1 and XT16 flash trigger. modeling lamp adjusts from 5% to 100%. Precise output displayed on LCD panel. 40 steps from 1/16*1/1. Do not keep using the modeling lamp for a long time; otherwise flammable accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time is recommended in this case. After 10 minutes, cool it down for 1 minute.

Godox SK300II-V Studio Flash Monolight (2-Light Kit) Godox SK300II-V Studio Flash Monolight (2-Light Kit)

on your advice, did just that after one session, can't/refused to put up with it now my sk400ii is effectively mothballed With the meter retract the dome and take a reading of a light or window. Stretch the fabric across the dome and take another reading. Use TTL and make any of these changes and the exposure will change, causing you to have to do more work fixing exposures in post. With the usual subject TTL will give you a useful exposure that can be fixed in post about 90% of the time. The rest of the time you will have to make Exposure Compensation and Flash Exposure Compensation changes because of unusual subjects (e.g. a bride in white against a white wall will be badly underexposed if you rely on just TTL and don't use EC and FEC). PROP: The modeling lamp's power changes with the flash's power. The bigger power the flash has, the brighter the modeling lamp is.Once you find the right exposure and the right power with off-camera flashes/strobes you can shoot thousands of images with manual exposure and flash power and every one will have the same exposure unless you change the flash to subject distance. When there is flammable accessory on the flash unit, do not keep the modeling lamp on for a long time. It is recommended to cool it down for one minute after 10 minutes' working. We always see a few people each month reaching out for advice on studio strobe lighting, more specifically the Godox sk400ii lighting system. Due to this, we decided to sit down and publish our dedicated Godox sk400ii review to try and help as many of our readers in this same situation as possible. I opted for the TT685's above the TT600's because a) they have TTL which maybe, just maybe I need from time to time and also, they can act as a master for the rest.

GODOX Photo Equipment Co.,Ltd. SK Series Kit-Product-GODOX Photo Equipment Co.,Ltd.

Shut down the power and remove the power cord before replacing the flash tube. Wear insulated gloves to loosen the iron wire on the tube, keep a balanced hold on the two feet of the flash tube and pull out the old tube gently. Take down the feet casing from the old tube and put it on the new one. Hold two feet of the new tube, and target directly towards the two copper outlets, then push them slightly in. Twine the iron wire on the stainless steel sheet to fix the flash tube.The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1, XT16 or FT-16 remote control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc. For indoor shots Im usually on f/4 1/125 ISO1600, with on camera flash bounced to ceiling (Im not using continuous lights). The apparatus shall not be exposed to tripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not flash directly towards naked eyes (especially those of babies), otherwise it may lead to visual impairment. Optic S1 Secondary Unit Setting: In M manual flash mode, press button so that this flash can function as an optic S1 secondary flash with optic sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects.