Remove the top footwear supports. Slide the PDM onto the dryers 2 upright air tubes. Replace the footwear supports and any extension tubes on top of the PDM. Plug PDM into an outlet and follow steps 1- 4 above. Operate the dryer as normal. Unplugging or turning off the dryer does not shut off the PDM. Switch off PDM separately. For footwear taller than 6," add PEET Extensions placed above PDM and below footwear supports (sold separately). Smart Temperature Control and Timer Functionality: Equipped with a PTC heat generator, the shoe dryer precisely controls the drying temperature, maintaining it at a safe 55°C to prevent overheating and damage to your beloved footwear. Customize drying times with 4, 8, and 12-hour timer options for safety and energy efficiency The Go! PEET Dryers will get warm, reaching their maximum temperature in 10 minutes, but they do not get hot. This product uses natural thermal convection technology; there are no fans or moving parts, therefore it will not blow hot air or make noise.

Boot Dryer Shoes Dryer, Portable Footwear Dryers Scienbeauty Boot Dryer Shoes Dryer, Portable Footwear Dryers

The Go! PEET Dryers can safely be left plugged in and in your footwear overnight or until you are ready to wear them again, without any harm to the product. For smaller bladders, slide the Nosepiece off the DryPort. Press down on the trigger and slide the bladder over the DryPort, making sure that the sides of the bladder are not touching it. Release the trigger. High Quality Materials: Premium cable that can withstand strength in pulling to prevent disconnection during use! Standard UK plug, no need adaptor. ULS94 V0 fire retardant shell to provide an additional safety guarantee. Assemble the Original PEET Dryer base by sliding together the base plates. (The Multi PEET Dryer base does not require assembly).

Suitable for Various Footwear: The shoe dryer accommodates a wide range of shoe types, including cotton slippers, leather shoes, canvas shoes, work boots, snow boots, and sneakers. Regardless of your shoe style, it delivers outstanding drying results If ignition doesn’t occur within 2-3 attempts, place your thumb over the large hole directly behind the retaining washer and relight. Once lit, leave your thumb over the hole until the heater warms up (about 15-30 seconds). There will be a small blue flame in the center tee. Do not place the PEET Dryer close to a second heat source, such as a furnace register. Go! PEET Dryer (M04P) When the Ozone Deodorizing Feature is operating, a faint bleach-like smell may be detected. This is both safe and normal. It indicates the unit is working as intended. PEET Deodorizer Module (M15O3)

Dryer Comparison - Christmas 2022 Best Drysure Shoe Dryer Comparison - Christmas 2022

The drying feature will remain on the entire time it is plugged in, as indicated by the red LED ON light.The PEET® Dryer is designed for easy use and long service. When you follow these simple instructions and guidelines, the PEET Dryer will dry your footwear or gear safely and efficiently. Drying time depends on material and saturation. ​ Hydration PEET safely and quietly dries bladders/reservoirs in 2-3 hours. SafeKeeping PEET Dryer (M10) WITH INTELLIGENT RESERVATION FUNCTION】Convenient reservation function is installed. When the reservation button is pushed, the LED light starts to blink. The reservation button defaults to 6 hours.