SONOFF Basic R2 10A Smart WiFi Wireless Light Switch, Universal DIY Module for Smart Home Automation Solution, Works with Amazon Alexa & Google Home, Compatible with IFTTT, No Hub Required

Product Information

SONOFF SV low voltage wireless remote switch makes all home appliances smart. As long as the mobile has network, customers can remotely control the appliances by turning them on off from anywhere at any time. Another feature available is to set timing schedules for the appliances, which can include countdown, scheduled on/off, and can thus, help customers maintain an easy life.

This is the Forum CUL-40039 Culina Konect Wireless On/Off Kinetic Switch Non-Dimmable Wi-Fi Module - a wifi and RF wireless receiver.The relay switch for the first channel: active high, power-on default low level. Note: As a switch button, there will be a period of high level at the moment of power-on, which requires a pull-down (1~4.7K) resistor to ground. The device obtains information in different ways in the two modes, read below section for details. 4.3 The Wi-Fi module basic workflow Place the module’s power supply (VCC) pin capacitance and other module pin capacitances, resistors as close as possible to the module pins, and the tracepath should be short.

Power-on status configuration: The power-on switch status can be configured on or off through the APP, and the default power-on status is off. Chip enable terminal high level: valid; low level: closed.Note: An external pull-up resistor of 1~10K, connect a 100nF capacitor to the ground. The switch for the first channel, active low. APP configuration pin, when the low level> 5S, enter the pairing mode. The switch for the third channel, active low. APP configuration pin, when the low level> 5S, enter the pairing mode.

Easy Installation

The timer function is configured through the APP, and the timer is divided into the following four types: Strong signal up to 40m range outdoors, 15m indoors for plasterboard, 8m indoors for concrete or glass PSF-B04 module can be used as a 4-channel switch, which can control the switch locally or remotely through APP. The switch for the second channel, active low. APP configuration pin, when the low level> 5S, enter the pairing mode.

Unregistered: The device has not been bound to account. The device needs to be bound to the eWeLink account to connect to the cloud server. You can bind the device by tap “Add Device” in the eWeLink APP.

The flashing mode of the Wi-Fi status light on the device represents the its current network working status. The specific status includes the following seven types: