Introducing the incredibly easy to use, effective, and revolutionary TRUE WIPE-LESS spray sealant! CarPro HydrO2 is formulated with Hydrophilic glass fibers, silicon polymers, and fluoropolymers and can be applied to all vehicle surfaces! Paint, glass, plastic, convertible tops, wheels, calipers, and wheel wells are all easily within reach with HydrO2 Lite. HydrO2 Lite was specifically formulated for the DIY guys looking to get the insane gloss and incredible self cleaning effect offered by Hydro2! This amazing ready to use coat forms an ultra-water-repellent coating and is applied by simply spraying and then rinsing off with only water! HydrO2 is meant to be applied and then immediately rinsed away using a strong stream of water. In ideal conditions, the product should be rinsed from the surface no more than 1 minute after you have started applying the solution to the panel you are working on. Ideal conditions consist of low humidity, moderate temperatures, and a cool surface. Since many of us will be using this product in warmer environments with potentially high humidity, it is important to remember to rinse the solution from the surface right away. I recommend working on only one panel at a time, beginning with the horizontal panels (roof, then hood, then trunk) and then working your way around the vertical panels. Mist a small amount of product onto the panel, and immediately rinse away (usually within 30 seconds from the time you started applying). There is no reason to let the product dwell on the surface. Also, remember to thoroughly soak the panel before application. Incorrect Dilution of Product with Water Finish by "flood rinsing" the vehicle without a spray nozzle to push all the water off from the top down. Dilute 1 part HydrO2 to 6-10 parts water. A spray bottle is suggested for fast and easy application. CarPro HydrO2 can be used on all surfaces from Paint, Glass, Plastic, Wheels to Brake Calipers and will leave a highly water-repellent coating that protects the surface from every day contamination as well as most acids & alkaline solutions, whilst at the same time offering significant UV Protection.

Excellent gliding lubrication and a wonderful fresh scent make for a safe, and enjoyable wash experience. Since HydrO2 is applied via spray bottle, it is not possible to be too precise with your application. Consider the scenario of applying HydrO2 to your roof. As you are spraying, there are particles of solution in the air that may miss the roof, and settle on the glass surrounding the roof, or even drift further and land on the hood, a door, or the trunk. Also, if you are applying the solution to your hood, it is highly likely some over spray will land on the fenders, bumper, and glass. You must be aware of any possible over spray areas while you are working, especially if you are working outdoors, and even more so if it is windy. It is a good idea to not only rinse the panel you are working on, but also those that are nearby, to reduce the chances of that over spray causing streaks if it is allowed to dry before you work on that panel. In the tradition of our HydrO2 line, HydrO2 Foam was formulated with hydrophilic glass fibers, fluoropolymers and can be applied to most solid vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach withHydrO2 Foam. This amazing rich foam wash and sealant in one lifts the dirt whilst in the wiping stage, and then during the rinse phase an ultra-water-repellent coating is immediately formed! Pre-mixed with a higher concentration, Carpro HydrO2 Liteoffers more shine, protection and importantly value for money than any comparative product on the market.This new innovative coat forms an ultra-water-repellent coating and is applied by simply spraying and and then rinsing off with only water! You no longer have to wipe the surface dry. Introducing the incredibly easy to use, effective, and revolutionary CARPRO Hydro Foam! Much more than a snow foam, Hydrofoam is a PH Neutral cleaner designed to gently lift and remove dirt from solid surfaces in both a safe and effective manner. HydroFoam was designed with a special lifting lubricant that not only allows the dirt to be lifted from the surface but also provides a lubricant to safely wash the paint when used as directed. Once applied, Hydrofoam really enhances the gloss, depth, and smoothness of your paint. CARPRO HydrO2 Touchess Silica Sealant is a concentrated solution. You dilute 1 part concentrate with 6 parts water – we recommend using a SprayMaster Heavy Duty Spray Bottle.

Do NOT apply HydrO2 in the sun or to a hot surface! Applying in this manner may cause streaks that do not wipe off easily. CARPRO HydrO2: Touchless Sealant (500ml)Concentrate Save money, time, and create superior end results!

Not Accounting for Over Spray

Depending on where you live, the time it may take for your exchanged product to reach you, may vary. To return your product, you should mail your product to: Clean and Shiny (UK) Limited , Unit 1 Redan Hill Industrial Estate , Aldershot , GU12 4SJ, United Kingdom

CarPro Reset is especially known for its ability to rejuvenate and deeply cleanse silica-based coatings such as CarPro CQuartz SiC, CQuartz UK Edition, Reload, Hydro and any other silica-based paint coating. It also helps the coatings release contamination from the coated surface.HydrO2 has an extremely good cost/performance ratio. With only 40ml of product required to complete an average size sedan, including all paint, glass, trim and wheels. HydrO2 instils a protective layer onto the surface that repels contaminants and creates an extreme hydrophobic effect on the surface. It improves the gloss of the vehicle immensely and creates maintenance to be effortless. Do not apply HydrO2 in the sun or to a hot surface! Applying in direct sunlight will lead to streaks that do not wipe off easily. Protect everything: Apply to areas you never could before! Not only body panels but protects calipers, undercarriage, wheel wells, door jambs, in between seals and more. Spray fine mist of diluted HydrO2 on no more than 1/4 of vehicle before rinsing. Very little is needed and no overlap is needed.

Can be used safely on any surface. Dirt and water are repelled from the surface. No cure time needed. Resistant to nearly all acids, alkaline solutions, and solvents. Instantly enhances the gloss, depth, and smoothness of your paint. Hydro Foam was formulated with hydrophilic glass fibers, fluoropolymers and can be applied to all vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach with HydroFoam. This truly unique foam wash and sealant (in one) lifts the dirt whilst in the Merino wiping stage and then, during the rinse phase, an ultra-water-repellent coating is immediately formed!Spray on and rinse off – that’s how simple CARPRO HydrO2 Touchless Silica Sealant is to apply. Read that sentence again – notice anything? There is no rubbing or buffing when you apply CARPRO HydrO2 Touchless Silica Sealant. Simply wash your car like you normally would and while it’s still wet, spray HydrO2 over every surface including paint, wheels, chrome, convertible tops, and glass, and simply rinse it off. After you’ve thoroughly rinsed HydrO2 off the surface, dry the vehicle with a quality microfiber drying towel or car dryer, like the Metro Master Blaster, and your vehicle will be protected for up to 3 months. CarPro HydrO2 is a revolutionary sealant that allows you to protect paint, glass, metal, plastic, and nearly any other surfaces without wiping, buffing, or rubbing. This touchless sealant is a breeze to use when done correctly, however there are many scenarios that may lead to issues such as streaking. In this article I will discuss some of the more common user mistakes made when using CarPro HydrO2 so that you will be better prepared to use this product properly and have a more enjoyable experience. Working in Sunlight or on Hot Surfaces