5pcs Rotary Point Burr Set Die Grinder Bit with 10 mm Shank and 6 mm, Carving Tool Tungsten Carbide Steel

Product Information

Syndent always recycles used-up die grinder bits for hard steel and doesn’t negatively affect the environment. Syndent has been a professional manufacturer of die grinder bits for hard steel in the past 11 years. The set contains one 3 mm and four 6 mm shank grinding pins of various end sizes, so you can match the end shape and thickness to the application.

You can fluently remove aluminum, reinforced plastic, soft steel, or any soft metal or material from your workpiece.

Diamond Cut Burrs = This is a finer tooth head which has a knurled appearance on the surface which creates a large number of smaller cutting faces. Syndent therefore covers all of your demands regarding the selection of very many shapes of die grinder bits for hard steel.

Carbide Burrs also perform better at higher temperatures than HSS, so you can run them hotter, and for longer. The dremel stones are next to useless (disappear in a cloud of dust as soon as you put any pressure on them, I think they're only useful for making jewellery), but the tungsten burrs whip away metal in a controllable but rapid fashion. You can comfortably use tungsten carbide die grinder bits in both high-mix and low-volume applications.Also, the final product results can include a lot of roughness and the die grinder bits wear faster.

High-temperature tolerance: The die grinder bits for steel should work even longer regardless to how hot it goes. The sharp blades of Syndent grinder bits for hard steel effectively cut even tight areas of a given workpiece. The ideal speed that best applies with your die grinder bits for aluminum hugely relies on the material at hand.Whether your task involves grinding, making jewelry, machining, polishing, or turning, you expect accurate results.

These burrs are made from ultra-hard tungsten carbide, allowing them to cut through a wide range of materials, including metals, plastics, wood, and more. With no doubt, you can have different sizes of Syndent die grinder bits for hard steel alongside their RPM. Other compatible rotary tools also can spin Syndent die grinder bits effectively as you cut materials.As the leading carbide burr manufacturer in Asia, Konetool supplies die grinder bits for metal with three cut styles, and different cut styles are best suited to certain materials. This allows for much smoother surfaces and cleaner finishes in both ferrous and non-ferrous metals, but is particularly good in softer metals like aluminium and mild steel, in addition to wood and plastics. The carbide burr set includes 20pcs different grinder bits for various drilling needs, working with most small rotary tools for DIY carving. Die grinder bits for hard steel need routine cleaning to enhance durability and overall performance.