Joint It Simple Jointing Mortar Dark Grey (1 x 20kg) - Large Size

Product Information

If a power washer is required, we recommend no more than 1500 PSI or 100 Bar water pressure, using a standard spray jet and not a turbo spinner. Joint-It Simple is a permeable, cement-free, ready-mixed, brush-in paving jointing compound made from a mixture of seven specialist, non-hazardous, sands and adhesives, that provides a durable, weed free finish. Joint-IT Neutral 20KG (For Purchase Only At The Same Time As Paving Pack) Increase quantity for SALE! However, armed with this knowledge others may not fall into the same trap and hopefully find that the product works very well. With minimum effort and maximum results, you need hard and soft broom water, preferably a hose and a tub of Joint It simple.

Traditional sand and cement methods of pointing are extremely time consuming and laborious and can crack and loosen over time. However as a precaution, and to ensure the safety of pets and children, we do recommend that you keep them away from the area for 24 hours during and post-application, as the product may be harmful if ingested. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. Flat gravel driveways would require sheets of plywood for the wheels of the manual pallet truck to roll on.

If the temperature is forecast to drop below 0 degrees within 12 hours of application, we recommend you postpone application until the weather is a bit warmer. Joint it does not leach and is non-staining, so it is safe for natural stone, but limestone and honed black granite should be pre-sealed before pointing with Joint it simple. When applying Joint-It Simple, take care to use plenty of water and remove all excess product from the top of the slabs at the end of the application. This active jointing compound is swept into the joints already soaked with water slabs compatible with all natural stone and concrete paving products.

Apply the required amount of Joint-It Slurry Primer to the base and the underside of the slab and reapply the paving slab in place. However Joint-It will set rock hard and the specialist mix will ensure that it stays in your joints for years to come. Available in three colours to match your patio, this grout will last a lot longer than other traditional grouts and mortars. When all of the joints are full of product, and the paving looks like this, then soak the paving again with water.I've used joint-it simple on numerous patio's now from sandstone to limestone to porcelain and I find it a fantastic product. Please let us know if you’ve got any more questions about Joint-It, or any of our other products and services.

While it is important to soak the paving before applying Joint-It Simple, it is equally important to keep it wet, particularly where you are working on a large area (one area might dry out by the time you are brushing the product in), or in warmer weather conditions. A quick application of Joint-It So Clean will keep your patio looking refreshed, clean and tidy – removing any lichen, moss and algae that may have settled in shaded areas. Joint-It Simple's natural sands harden on contact with air, so simply wet the area, brush in the product, and leave it to do the rest. Joint-It Simple is tightly vacuum packed inside a tough plastic bag to prevent any air from reaching the product before it is ready to be used. This easy jointing compound provides the ideal solution for professional contractors and homeowners.Joint-It Simple – Extra Large 20kg Tub – Simply the best – Ready to use paving jointing mortar, ideal for jointing paving slabs, cobbles and natural stone. It is specially formulated with seven unique specialist types of glue to ensure that it will stay in your joints for many years. Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt. Designed for use in all weathers, replaces traditional mortars and grouts with a more modern and efficient product.