Minelab Equinox 600 Metal Detector Depth Sensor Multi-Frequency VLF

Product Information

It also includes an additional single 4kHz frequency, increased submersible depth from 10 ft to 16 ft, 119 segment notch discrimination ( vs 50 segments in the Equinox 600 ), slightly lighter, vibration option and probably the nicest feature: ML-85 Wireless Headphones standard ( opposed to the 600s wired headphones ). Simultaneous Multi-Frequency A few detectors on the market claim to be multi-frequency, but these simply switch different between single frequencies, operating on just one at any given time. The EQUINOX you can operate across the full spectrum of frequencies simultaneously for maximum results. Both models cover a much broader range of targets when operating in Multi than any one single frequency can, however, if excessive ground noise is present in a particular detecting location, switching into a single frequency can help to eliminate this.

Adjust an array of essential and advanced detecting functions including Noise Cancel, Ground Balance, Volume Adjust, Threshold Level, Target Tone, Accept / Reject and Recovery Speed.I honestly couldn't say any of the other changes made much of a difference as ground conditions were changing at the same time.

Choosing LP will give you the best service, products and advice you need for all your metal detecting endeavours! Wireless Audio Compatible - Compatible with ultra-fast wireless audio with the WM 08, and fast aptX™ Low Latency / Bluetooth headphones. I know some people like to tweak and analyse and squeeze every available bit out of the performance. Took it out for a field test and found 3 coins and couple bullets in a hour over site I've been over for years seems pretty deep machine well impressed so far. Minelab's patented Multi IQ allows the detector to run multiple frequencies simultaneously, though you also have the choice to use the NOX 600 with a single frequency of either 5khz, 10khz, or 15khz.The EQUINOX Series features Minelab's all new Multi-IQ simultaneous multi-frequency technology and combines fast recovery speed with depth in any ground type and is compatible with low latency wireless audio! Fast recovery speed with accurate Target ID ensures you won't miss any valuable targets amongst the trash.

Compatible with ultra-fast wireless audio with the WM 08, and fast aptX Low Latency / Bluetooth headphones.

The EQUINOX Series features Minelab's all-new Multi-IQ simultaneous multi-frequency technology, combines fast recovery speed with depth in any ground type, and is compatible with low-latency wireless audio. Many experienced beach detectorists say that the 600 actually works better with less noise on the beaches over the 800 model due to only having the 3 lower frequencies 5, 10, and 15kHz. The Multi-IQ setting is used in both Beach mode settings and is perfect for helping navigate all the mineralized water and sand that you will encounter.

The EQUINOX Series is the all-terrain multi-purpose detector that obsoletes all single frequency VLF detectors.I normally use 50 tones all-metal but on a really quiet field that appeared to have a saturation of iron I switched to 2 tones but found that it was causing iron to false which was unexpected. The Equinox 600 and Equinox 800 have long been known to be extremely good in highly mineralized soils and salt water beaches. Three Frequency Times Three) provides three individual transmit frequencies in the one metal detector, selectable at the push of a button. Detect Modes and operating frequency can be instantly changed at the push of a button for a dynamic and uninterrupted detecting experience.