Macdee Dual Flush Outlet Valve

Product Information

I then sprayed a load of WD40 onto the guide rails and the pully mechanism and then pulled on the cable repeatidly to get the WD40 to move around and do its buisness.

I might dissassemble my old one to see why it was jamming because outwardly I can't see a problem, but the problem has gone away with a new one. turn the valve 1/4 of a turn will dismantle the top of the valve from the base so you can gain access to the seal at the base. Phone MT AGENCIES in finglas and ask them for your nearest agent for the Aquasave bottom entry inlet valve low pressure. When you say the big white bit is that the top of the tube closest to me that the blue tube goes in to?

The Kayla cable operated dual flush valve from Derwent Macdee is one of the number one sellers in the replacement market. Inside you will see its a very, very basic design with what is effectively a bicycle brake cable from the push button unit, pulling on a little pully device which lifts the plunger at the base. Check the seal at the bottom of the valve sometimes cleaning them of scale can stop them passing water into the bowl.

The top section of the valve is compatible with the now discontinued AFV40100 and AFV40200 models and simply fits into the existing cradles without removing the cistern. Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday).Toilet flush valves are replacement parts for the toilet flush system, inside a toilet cistern that controls tank filling and toilet flushing. You can save on the squirting a bit by opening the little plastic box (one small Philips screw and a bit of levering) and getting at the cable directly, but before you open it look carefully at how much of the cable outer is showing. The internal overflow prevents any excess water from spilling over and causing flooding, and it has an adjustable range of 190 mm to 330 mm.