Joined in 2023 
82 
63 About this deal
Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great, fully featured hub that’s still affordable and – most importantly – it just works. Note—USB splitter is bus powered, requires no additional AC power. This hub is intended for low or self powered devices. Not compatible with automotive USB ports
Upstream connection (Type-A or Type-C?): USB hubs have multiple downstream ports to connect to your devices but only one upstream connector, which could be a port but is often a built-in wire that connects to your computer. Many laptops, including a lot of the best Ultrabooks, only have USB-C ports, so your hub's upstream connector would have to be Type-C. The hub supports fast data transfers up to 5Gbps for expanding USB ports or connecting multiple devices. It also has USB on the go and simultaneous transfers across all ports. It’s plug-and-play, and no extra drivers are needed for PC, Mac, or select versions of Linux (2.6.14 or later). An integrated safety chip offers overcurrent, overcharge, overvoltage, overheat, and short-circuit protection for both the hub and any connected devices. While all USB ports provide some amount of power for attached devices, the available power may not be enough for certain high-current devices such as USB hubs or external hard drives. High-current devices usually come with their own power adapter, making them self-powered, in contrast to a bus-powered device that draws all of its power from the host computer's USB interface. Bus-powered devices can cause issues if they need more power than is available from the host machine.It's capable of outputting to dual 4K displays (or a single 5K display), has 10 GB/s USB 3.1 Gen. 2 capability, and can charge Thunderbolt 3 laptops with 85W power delivery. It's also designed to be used horizontally or vertically to better accommodate different setups. The chassis is aluminum, so it’s rugged yet lightweight, and it looks great, too. This is the ultimate hub for anyone who wants to connect several devices or transfer data from multiple USB sources simultaneously. It's worth noting that when plugged into a computer, there is some connection latency for the higher-count ports. But the first four ports are fast and responsive. Many of our devices that include power adapters, especially USB hubs, will function in either self-powered or bus-powered mode. However, even though the device may function, each additional device attached to the host computer reduces the total available bus power. If the power runs out, any USB device attached to the computer may suddenly disconnect. If this were to happen to a USB storage device, such an event could result in permanent data loss. The durable aluminum shell rounds out the features list and offers a sleek look. It matches particularly well with aluminum Chromebooks, laptops, and most MacBooks.
Where I am seeing severe degradation in transfer speeds using USB 3 hubs is from SSD to SSD connected to the same hub. Can you please explain the best testing environment setup? How to establish a solid baseline? Software used. What to use for data transfer.In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). StarTech.com’s comprehensive portfolio of USB Hubs offers a solution for virtually any application, including: Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into.
Not every USB Hub is one of the best USB hubs you can buy. We tested a number of other models that are worth considering, but not necessarily at the head of the class.
Short of ports and crucial connections on your laptop, tablet or PC? Splash out on a USB-C hub and enjoy all the connectivity you need
It has a power adapter and a dedicated power supply, which makes sense considering it’s so large. It should be noted that both the power and main USB cable must be connected for it to work. The chassis is plastic, so no premium materials were used here, but it’s so big it’s hard to imagine anyone breaking this thing without some serious force. It’s about the size of your average surge protector and measures 7.9 x 2.4 x 0.9 inches. Two Ports in One—This USB adapter has a clean and compact design. Standard USB hub splitter enables two devices to share a single available USB port with full USB 2.0 compatibility and performance If the number of ports is your biggest concern, the Acasis 16-port USB hub is one of the biggest. All 16 ports are USB 3.0, and they all support fast charging up to 2.1A and data transfers up to 5Gbps. There are no compromises, no ports left behind—just full functionality across the entire unit. There are also seven- and ten-port variants if you want something slightly smaller.
We also like the choice of cables, with a short, pull-out cable that stows inside the case for travel, plus a longer desktop cable for when you need to stretch a little further. It gives this unit a little more flexibility than other USB-C hubs. All StarTech.com USB Hubs are plug-and-play, providing easy automatic driver installation that’s Operating System independent. Sabrent's HB-U3CR looks like it was built for MacBooks, thanks to a gunmetal gray aluminum chassis and a stylish, slanted design that will prop it up at an insertion-friendly angle on any table. However, it's an equally strong choice for use with a PC laptop that has USB-C ports and needs a few USB Type-A connections. We also connected an Android phone to the ports and recorded how many volts and amps it received. The phone charging test was probably the most realistic as it showed what kind of volts and amps a real device would negotiate with the hub.This UGreen unit is another basic USB hub, with four USB 3.0/3.1 Gen 1 ports connecting through a single USB-A connection. Disappointingly, what looks like an aluminium casing turns out to be plastic, which feels a little creaky in comparison to some models, but it’s robust enough for daily desktop or mobile use. The big advantage this one has over similarly priced rivals is a 5V micro-USB input, meaning it can charge devices while in use (without any fast charge support) and run one or more USB SSDs or HDDs – we tried it with one of each without any issues. The only downside? You’ll need to supply your own charger and cable, but it’s hard to grumble at this price. Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place. At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once.
Great Deal 
New Comment