ZJIEX Bakelite Phenolic Resin Plate Black Hardboard Plywood Suitable for Equipment with High Mechanical Performance Requirements-300x300x3mm

Product Information

A fiber-pigtailed laser should always be turned off before connecting it to or disconnecting it from another fiber, especially when the laser is at power levels above 10 mW. Medium Density Fibreboard, better known as MDF, found fame in the 1990s as the unexpected star of TV property makeover shows, and for good reason. Its machining capability, versatility and unique texture combine to make MDF sheets the go-to material for all sorts of home improvements. Our MDF boards, hardboard and pinboard give you plenty of options when you need sheet materials. Class 2 lasers, which are limited to 1 mW of visible continuous-wave radiation, are safe because the blink reflex will limit the exposure in the eye to 0.25 seconds. This category only applies to visible radiation (400 - 700 nm).

Regardless of laser class, Thorlabs recommends the use of laser safety eyewear whenever working with laser beams with non-negligible powers, since metallic tools such as screwdrivers can accidentally redirect a beam. Tested using the former-generation HRS015 Stabilized HeNe Laser, which has been replaced by the HRS015B. Durable – hardboard is ridiculously durable and strong. However, don’t use power washers since they can cause dents on the surface and give way for moisture to get in. Class 1M lasers are safe except when used in conjunction with optical components such as telescopes and microscopes. Lasers belonging to this class emit large-diameter or divergent beams, and the MPE cannot normally be exceeded unless focusing or imaging optics are used to narrow the beam. However, if the beam is refocused, the hazard may be increased and the class may be changed accordingly. Because of the blink reflex, this class of laser is classified as safe as long as the beam is not viewed through optical instruments. This laser class also applies to larger-diameter or diverging laser beams.This class of laser is safe under all conditions of normal use, including use with optical instruments for intrabeam viewing. Lasers in this class do not emit radiation at levels that may cause injury during normal operation, and therefore the maximum permissible exposure (MPE) cannot be exceeded. Class 1 lasers can also include enclosed, high-power lasers where exposure to the radiation is not possible without opening or shutting down the laser. Our Chipboard and OSB boards provide a stable structural platform, thanks to the manufacturing process used in their construction. Tongue and groove boards can be used to create moisture-resistant floors during refurbishment and new-build completions.

HEAVY PRODUCT - This Product weighs approx 40Kg per sheet, Customer mustto haveTwo peopleat delivery point for unloading the delivery lorryand carrying goodsin to own property. Laser goggles designed for specific wavelengths should be clearly available near laser setups to protect the wearer from unintentional laser reflections.

Shop local

Easy to work with – there is uniformity in the weight and density of the hardboard. It is also available in varying sizes. That implies less labour and low cost. It is also easy to install, and therefore you save money. In fact, most homeowners consider DIY when working with a standard hardboard. Our sheet material products are suitable for a wide range of different applications, such as flooring, roofing, cabinet making and van lining. Offering the beneficial characteristics of timber, but with unique features, sheet materials deliver on density, weight and cost.

You will need something to cut the metal banding with that secures your items to the pallet, good strong pliers or wire cutters will do. Youmustto have at least Two peopleat delivery point for unloading the delivery lorryand carrying goodsin to yourproperty. Be aware that lenses and other optical devices may reflect a portion of the incident beam from the front or rear surface. Welding was seen most commonly across Austin Healey 3000, Mark 3 BJ8 Quarter Panels, Triumph TR4 – TR6 Panel Kits and Jaguar Saloon Door Panels. Goggles are marked with the wavelength range over which protection is afforded and the minimum optical density within that range.

If you have a notice board requirement we offer Sundeala. 9mm is available and is easy to machine to the specific size you need. The wood used in our sheet materials is responsibly sourced from sustainably-managed forests. For more information about this, look for the Chain of Custody listed under each product's details. Some material may need to be trimmed off either end of the LPCM10 prior to use. However, a minimum of 10.0 m of usable material is included. Please note that the LPCM10 is shipped in a crate weighing over 60 kg (132 lbs) and requires a forklift for transport. The roll itself is approximately 30 kg (66 lbs); a team lift is recommended. Remove unnecessary reflective items such as reflective jewelry (e.g., rings, watches, etc.) while working near the beam path. Class 3R lasers produce visible and invisible light that is hazardous under direct and specular-reflection viewing conditions. Eye injuries may occur if you directly view the beam, especially when using optical instruments. Lasers in this class are considered safe as long as they are handled with restricted beam viewing. The MPE can be exceeded with this class of laser; however, this presents a low risk level to injury. Visible, continuous-wave lasers in this class are limited to 5mW of output power.

All beams should be terminated at the edge of the table, and laboratory doors should be closed whenever a laser is in use. Thorlabs' Enclosure Systems can be used to contain optical setups to isolate or minimize laser hazards. Environmentally friendly – unlike real wood, hardboard is considered environmentally friendly. The material is made from leftover wood and fibres. On the other hand, real wood relies on cutting down trees, hence deforestation.

Laser Classification

It gives you the appearance of real wood – At a glance, you cannot differentiate hardboard from real wood. Only a keen and experienced person can identify grain and texture differences. So, without affecting your bank balances, you can get the grain and texture of the original wood.