Ronseal DS25L30M Decking Stripper 2.5 Litre, 2.5L

Product Information

How do they compare? All of these products are top-performing wood strippers, though they each have differences which may better suit specific requirements. The only two of these strippers that are intended for use on solid paint are the Dumond Chemicals Smart Strip Advanced Paint Remover and the Woodrich Heavy Duty Wood Stripper and Wood Cleaner. The remaining three are intended for use on clear varnish, sealers, and stains, or semi-transparent stains. Once removed, rinse thoroughly with lots of fresh clean water, using the highest pressure from the water source available or via the use a pressure washer at 500-1000 psi (35-70 bars). Rinse with copious amounts of freshwater, using the highest pressure from the water source available or use a Power Washer at 500-1000 psi (35-70 bars) working in direction of grain. (Rinse adjacent areas at same time). This heavy-duty ground cover is puncture-resistant and ideal for use on rough ground and under footpaths or driveways.

Before I go on though, it’s worth mentioning that your fish won’t thank you if this ends up in the pond nor your kids. So I’d be looking to use this on a dry day. Scrub the surface with a stiff brush. Go along the grooves and across to loosen the finish underneath. Always do a small test area before beginning any project to assess results. Follow the manufacturer's instructions on the tin at all times. When you compare it to the Everbuild you won’t have any issues at all with the quality. Both are up to the job of killing and loosening Algae and mould, taking a fair bit of the strain out of the process. I’ll say it again though, with volume it’s probably even more important – you could do with a jet washer to lighten the load. Gardening expert Fiona recommends using a garden hose rather than a pressure washer to clean the desk if you really don't want to risk causing any damage.Leave it to work for around 30 minutes, keeping an eye out for any patches that start to dry out. If this happens, re-apply on these areas. When the finish is coming off, use a high-pressure washer with a max of 2700 PSI and work in the direction of the timber grain. For a more effective process, use a high-pressure washer with an attached turbo nozzle. The stripper is water-based and odor-free, with no VOC’s. It is biodegradable and pH neutral, so you want have to follow up on the application with a wood neutralizer. The formula is safe for the environment, containing no toxic substances. It is safer for you and your family to use, being noncarcinogenic and noncaustic. The manufacturers of this product state it will remove up to 15 layers of paint in one application. Start spraying or rolling the stripper along edges first and then fill up the entire remaining area, During application, make sure to keep the applied surface wet with a garden hose water mist or spray. To select the correct glove size, simply measure across your palm at the point indicated in the last picture on this listing. Then compare your measurement with the chart below to ensure you select the correct glove size for your hand.

Cover and protect everything you do not wish to strip or clean, including plants, shrubs and any aluminium surfaces. Our Heavy Duty Weed Control Fabric is a great weed suppressant and suitable for gardens, flower beds, footpaths, and driveways. Before applying Dilunett to the entire area, carry out a test to see how long the ‘touch time’ will be. This means applying the Dilunett to a small area and waiting for a short while for it to work. Give a little scrub at the edge to see if the coatings are lifting. If not then leave for a while longer and try again. Continuing in this way until the coating is lifting will give you the ‘touch time’. This will help to determine how long to leave the Dilunett to work. Always work in manageable areas which can be completed within your touch time.For a gentler clean to remove surface dirt and cobwebs, you can use a solution of washing up liquid in warm water. Be careful not to over scrub with anything harshly abrasive, and avoid rubbing against the grain, as that can leave marks. Need to be careful when applying as you can fade your boards (only temporary until stain applied though) Shake tin thoroughly before pouring the stripper into a suitable metal or plastic container. Stir before and during use.