DEWALT 1 Pair of PU Comfort Insoles

Product Information

Direct attach – With the direct attach method, a mould is made to fit the underside of the uppers. This mould is then filled with a molten rubber, which hardens with the uppers embedded inside. More durable than cement but less durable than a welt, this is a good midrange option that allows for superior stability and mobility. This is the material of choice for most safety boot uppers, due to the fact that it wears hard, requires little maintenance, and looks better with age. In fact, this is the best grade of leather for any purpose, as it makes use of the entire animal skin. Other grades, like top-grain or genuine leather, split the skin into its constituent layers as a cost-cutting measure. Finally, we come to the Camden, DeWalt’s answer to anyone looking for industrial footwear that doesn’t look too bulky or technical. Camden may be easy on the eyes, but they’re tough against the hazards which threaten your feet on or off the job. The Hammer’s soft toe and EVA midsole allow for a lightweight boot (just 1.8kg), and you wouldn’t be uncomfortable walking 10 miles a day or more in these. The tough, full-grain leather does take a little bit of time to break in, but once they do you’ll never find a better fit. That said, if you’re a half size, you’ll probably want to size up; the crazy horse leather isn’t going to stretch a whole lot! Below, we review the seven best safety boots from industry leaders, DeWalt 1. DeWalt Titanium Safety Boot

But there are many safety boots which don’t use steel, so what makes DeWalt’s Hammer special? How about the brown crazy horse leather upper–the same hardwearing stuff they use in horse saddles. Not only is it tough as nails, it’ll look great as it ages, making you look forward to putting your boots on in the morning. It starts with the dual-density insole, which marries extreme hard-wearing PU with a special memory foam that cradles your feet with support as you walk, lift, and climb. Beneath that is an injection-moulded Phylon midsole, offering powerful abrasion resistance and superior energy absorption. Finally, it comes together upon dual PU/rubber outsoles, which feature SRA slip resistance and 300° heat resistance.

Newsletter Sign-Up

The Builder safety boot from DeWalt is a highly walkable boot that won’t break the bank. While this is one of the humbler recommendations on our list in terms of features, it nevertheless provides exceptional comfort and a good level of protection for your pound. Polyvinyl chloride is another common outsole material, due to its resistance to oils, abrasions, and electricity. It’s not as grippy as TPU or other rubber compounds; as such PVC outsoles tend to have novel tread designs or make use of other materials for traction. How to care for your safety boots Frequently working long hours on your feet takes a significant toll, so keeping them comfy is best for health, wellness and work productivity. The DeWalt Polyurethane Comfort Work Boot Insolesare replacement insoles for your work boots that provide far superior comfort and support. With cushioning in the arch area and perforation holes, these insoles make long shifts that bit more bearable. What's Included? Together with the outsole, the full-grain leather upper repels oil and water alike, and features superior chemical resistance. The tread also bears an SRA slip rating, which retains a good grip even on soapy ceramic floors.

A shoe or boot’s upper refers to the material which covers your foot and leg. With safety boots, these tend to consist of leather, but can incorporate various types of rubber and plastic as well. Uppers may be cut as a single piece, or bonded together from several smaller components. As one of the best-selling safety boots on the market, DeWalt’s Titanium has plenty of people to vouch for their performance in the field. The consensus is that they’re easy to wear in, and extremely sturdy without being too heavy (just 2.4kg). We’ve mentioned that Camden meets with American safety standards, but sadly that doesn’t fully translate to European standards. You’ll be fine with the toe cap in most cases, but if your job requires a specific level of electrical, chemical, or slip resistance, best find something with the necessary qualifications to get through the red tape. Don’t forget there’s no steel midsole, either. With a name like Poseidon, you’d expect something like a Wellington boot. While that’s certainly not the case here, DeWalt is still offering us a water-resistant safety boot, with a build rugged enough to live up to its namesake. Today, we’re taking a look at the best DeWALT work boots on the market, and talking about what makes a great boot great. The top 7 DeWalt safety boots

Key Features and Benefits

If money’s no object and you’re in need of a do-everything work boot, you owe it to yourself to give DeWalt’s Titanium line a look. A relative newcomer to the scene, Titanium is part of the Heritage Series, which makes its mark by never cutting corners on design, materials, or production. The DeWalt Work Boot Insoles come in one universal cut-to-fit size and will fit anyone up to Size 12. To trim the insole down to your size, remove your current insole from your shoe and align it with the DeWalt insole. Using the old insole as a guide, trim the DeWalt insole until it is cut down to the same size. Key Features and Benefits Regularly condition the leather. Every few weeks, you’ll want to apply some wax or oil conditioner to the leather uppers to keep them supple and strong. You should do this immediately after cleaning.

Outsole – This is, apart from the uppers, the most visible part of the boot, and certainly the most rugged. They’re typically made from PVC or proprietary rubber compounds, and are primarily designed to provide grip, alongside resistance to electricity and chemicals. Additionally, pay attention to the design of the cuff around the top of the uppers. Typically speaking, safety boot cuffs will have lots of padding to afford a more snug, secure fit. Otherwise, they risk rubbing your Achilles tendon raw. Soles The DeWalt Rigger is a best-selling boot, and provide an excellent, rugged alternative to Wellington style boots. They’re unisex, and can be comfortably worn by anyone; just keep in mind that you might need to size up if you’re on the fence, as they offer a tight fit by design. The Walk-Hero Comfort and Support are low-profile, rigid insoles that provide support for all arch types and are made to help alleviate symptoms of plantar fasciitis. Firm and pronounced arch support help provide stability to the plantar fascia, and a thin mid-layer of silicone gives a slight cushion to the entire insole. Their rigid support shell makes them easy to insert into any shoe, be it casual, athletic, or work footwear. Because of their ability to support all arch types and their ease of fitting into multiple different shoes, these insoles are an excellent choice for everyday use.Be aware that the toe cap isn’t as spacious as some may like, so keep this in mind when choosing your safety boot. The Powerstep Pinnacle are the best insoles we tested for helping remedy foot pain due to pronation. The most common pronation issues are overpronation and underpronation, whereby the natural inward rolling of the foot on impact either rolls too much (overpronation) or too little (underpronation), putting pressure on specific areas instead of distributing force evenly throughout the foot. This can lead to many issues down the line, including the common plantar fasciitis. The Powerstep Pinnacle insoles help keep the feet from over or under pronating with their deep heel cup that aids with natural alignment, and a semi-rigid shell with arch support that provides stability. They're stiff and slip easily into your shoes, allowing you to put them into multiple pairs of shoes without hassle, and are low-profile enough not to take up too much room. Safety boots aren’t just a nice thing to have, they’re often a requirement at the workplace. And no manufacturer knows the demands of the workplace better than DeWALT. Under the hood, there’s a sturdy, penetration-resistant steel midsole to complement the steel toe box. What’s more, you don’t have to worry about rolling the boot as there’s padded TPU heel support built right in. There’s more padding on the cuff for a comfortable fit, flanked by dual bootstraps for easy donning. DeWalt Rigger at a glance DeWalt is a titan of heavy industrial gear, and their safety boots are well-regarded as such. Whether you need the maximum amount of protection, with steel toes and midsoles, or something lightweight to withstand miles of walking, climbing, and lifting, DeWalt safety boots make the cut.

The primary advantages are enhanced electrical resistance, greater thermal insulation, and invisibility to metal detectors. Of course, TPU also makes for a much lighter, more walkable boot for those of you who need to hoof it several miles per day. That’s not to say DeWalt doesn’t spare a thought for aesthetics, as their Rigger boots sport rugged good looks that wear hard. Featuring a brown, full-grain leather upper, joined by a rubber outsole, the rigger offers coverage and resistance to oil and chemical exposure. The Goodyear welt makes it simple to replace the soles once they’ve worn out, allowing you to get a lot more life out of those high-quality uppers. Inside, your feet will enjoy maximum comfort thanks the layering of dual-density PU/memory foam insole upon EVA midsole. What’s more, the insole is anti-bacterial, helping you stave off athlete’s foot, fungus, and other nasty afflictions of busy feet. The Apprentice also helps you keep stable with a TPU heel support. All together, these features work to absorb the energy of impact from your feet hitting the ground, helping you work longer hours with less pain. DeWalt Apprentice at a glance

Guaranteed Tough.

So, the Titanium’s rugged, but that’s nothing if it doesn’t protect your feet. But that it does exceedingly well, with steel in both the toe cap and embedded within the PU midsole. As an American boot, it conforms with that country’s safety standards with full ASTM compliance, rating well vs. impact, compression, and electrical hazards. (This is equivalent to Europe’s EN 345 standard). Titanium at a glance Not every boot has a gusset, but those that do typically employ them as moisture barriers, which connect the tongue to the shaft.