Joined in 2023 
82 
63 About this deal
Before applying Soudal Firecement HT°, it is essential to ensure that the surfaces are clean, dry, and free of dust and grease. Any loose debris or contaminants should be removed thoroughly. Experts recommend using masking tape around the top and bottom of the seal so that a clean straight edge of the heat resistant cement can be applied and exposed to the heat. What is the maximum output in kW of your "5kW" wood burning stove? The majority of manufacturers just specify the “nominal output” and this figure means very little in real life. The nominal is a figure the manufacturer chooses to sell the stove at - the stove is capable of reaching at least this output with one fuel load. Nominal means "capable of". But it is not the maximum. If you are NOT fitting a liner, but installing a clip-together chimney system (twin-wall), then you will secure your twin-wall adaptor to your vitreous (or to your stove if directly attached) using fire cement or fireproof webbing (webbing is so much neater and more effective).
To avoid smoke seeping into your room, you don’t want any gaps through the components of your stove system where it might get out. Equally, to avoid causing damage to your stove and get the most value from the fuel you burn, you do not want air to be able to get into your stove through such gaps and cause the appliance to operate at too high a temperature. Clean any uncured sealant immediately after use with water. Wipe off any excess sealant to avoid it drying on surfaces. Please note that once the sealant cures, it becomes difficult to remove. Therefore, it is essential to clean the product residue promptly. A slight heating up of the installation during 12 hours after application of Firecement HT° will prevent the forming of bubbles and improve the sealant structure. Does not contain Asbestos or other harmful components: Soudal Firecement HT° is free of asbestos and any other harmful components, ensuring a safer working and living environment. Gr8Fires on How this living room was transformed with a media wall featuring the Ezee Glow Celestial Built-In Electric FireApply Consistent Pressure: Apply consistent pressure on the caulking gun trigger to dispense the sealant. Start at one end of the joint or gap and steadily move along its length. Heat retardant sealing at existing constructions: Soudal Firecement HT° can be used for heat retardant sealing in existing constructions, providing reliable protection against high temperatures.
No wood-burning stove installation is complete with a trusty tube of high temperature silicone sealant.Soudal Firecement HT° is a top-quality, high temperature resistant fire cement sealant designed for applications where extreme heat is a concern. With its exceptional capabilities, this product offers reliable sealing and protection in various environments. It is effortless to use, ready to be applied directly from the container without any additional mixing or preparation. Fire putty is also widely used for sealing against the escape of smoke and flue gases in residential and commercial appliances, such as stoves, chimneys, and central heating systems. How to Use Fire Cement on Flue Pipe? Fire Rating of 120 minutes (Test Report 7830): Soudal Firecement HT° has a tested fire rating of 120 minutes, demonstrating its exceptional fire resistance and reliability.
Great Deal 
New Comment