MICROJIG GR-100GRR-Ripper 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by , Yellow

Product Information

Theadjustable Spacer gives you 54% more gripping area for controlling larger material. Fully adjustable. Use it as a router table guide for bullnose routing and eliminating snipe from your full-profile cuts.

The Gripper is a great addition to any workshop that has a table saw, router, jointer - almost any power tool where your hands could get near the cutters. I do a lot of cutting of 'small' pieces on my table saw - to build boxes, small projects, smaller cabinets, cut blanks for pen turning, toys, Christmas ornaments - lots. The Gripper is the _only_ way I would consider doing a lot of cuts as it lets you handle smaller parts, work with the fence close to the blade, and similar situations. The powerful grip gives you unmatched control and holds over a variety of materials such as cherry, maple, walnut, poplar, purple heart, aluminum, plastics, and the list goes on. Save money on scrap and expensive exotic woods. The GRR-RIPPER acts as a Moving-Blade-Guard™ for total hand protection.
The Adjustable Centre Leg grips the off cut piece and prevents wood burn. The 1/4″ Leg controls the keeper piece. Balance Support stabilises small and narrow workpieces. Fully adjustable to allow for a limitless amount of uses.GRR-RIPPER Advanced is compatiable with virtually all table saws, router tables, jointers, and band saws.

Adjustable Spacer gives you 54% more gripping surface and 1" of additional cut capacity to take on your biggest projects and wider cuts. Henry Wang started MICROJIG and invented the GRR-RIPPER in his small garage workshop to cut precise small strips and eliminate waste in his projects. Now, the GRR-RIPPER has revolutionized the way we work with wood and available in 20 countries. Still proudly made in the USA. Cut with Surgical Precision with the 1/4" Leg and rip down to 1/4" on your Table Saw. With the optional 1/8" Leg, you can cut down to an impressive 1/8" for outstanding detail.GRR-RIPPER Advanced comes with 3 legs featuring proprietary Green GRR-RIP® non-slip material, built-in balance support, adjustable handle, and includes two additional accessories: Stabilizing Plate, Adjustable Spacer. Inwardpressure - Keeps the material gliding against the fence preventing wood drifting, burning, and binding Patentednon-slip Green GRR-RIP gives superior gripping power - treaded grooves increase traction, even with sawdust. Stabilise your cut with the Built-in Balance Support to square your cut and safely handle the smallest parts of wood when cutting on the table saw or router table. Rip as accurate as a 1/4" standard without readjusting the fence. The GRR-RIPPER Advanced gives you the three essential forces of control you need when working on a table saw:

Important Notice:Use Micro Jig products to improve your safety when machining, they should complement your machine guardsnotreplace them; for a safe and happy life of woodworking. All relevant health and safety practices should be used which are applicable to your country of residence. Inward Pressure: Keeps the material gliding against the fence preventing wood drifting, burning, and binding The other thing that moved me away from the GrrRipper was watching the dvd set “Revelations on Table Saw Set-up and Safety” located here: The main thing I don’t like about the GrrRipper system is that you can’t use your blade guard, which severely impacts dust control. The factory guard was pretty good at grabbing dust, but then I bought a Shark Guard. It grabs nearly 100% of the fine dust, even when cleaning up an edge. And the design of its splitter/knife is a massive safety improvement over the splitter on the factory guard. Important Notice: Use Micro Jig products to improve your safety when machining, they should complement your machine guards not replace them; for a safe and happy life of woodworking. All relevant health and safety practices should be used which are applicable to your country of residence.I got two grippers when I bought my Sawstop. I watched many videos and began using them for all my cuts. There were many things I liked about them, especially their ability to make thin strip cutting more straightforward. The result is cleaner, incredibly precise cuts with your hands protected and keeping the wood under control throughout the cut. The legs of the GRR-RIPPER2 Go are staggered so any rip cut from 5/16" (8mm) to 2" (50mm) up can be made with the blade passing safely underneath. GRR-RIPPER2 Go comes with the Micro Jig patented Colour Coded Index to help you set your cuts properly. The Micro Jig GRR-Ripper? lets you feed both sides of a workpiece parallel through the saw blade and eliminates bare hand feeding.

GRR-RIPPER has over 30 unique uses on the table saw, router table, jointer, and band saws. The powerful hold, extreme accuracy, and versatile adjustability will help you maximise your materials and greatly improve your protection against dangerous accidents. The GRR-RIPPER Advanced comes with two additional accessories for extreme versatility and precision in your shop: Forward Pressure: Feeds both the keeper and offcut of your cut with speed and accuracy parallel to the blade and fenceTheGRR-RIPPER Advanced gives you the three essential forces of control you need when working on a table saw: The Adjustable Centre Leg accommodates for a variety of different sizes and widths of material while the grip secures a virtually unlimited variety of woods, solid surfaces, aluminium or even plastic. GRR-RIPPER Handle can be angled and adjusted for your comfort and control. GRR-RIPPER Advanced comes with 3 legs featuringpatentedGreen GRR-RIP® non-slip material, built-in balance support, adjustable handle Includesstabilisingplate andadjustablespacer.