Clearwater CH0018 Lay-Z-Spa Chemical Starter Kit for Hot Tub and Spa Water Treatment (Includes Chlorine, pH Minus, pH Plus, Foam Remover and Test Strips)

Product Information

Consider using clearwater hot tub chemical starter kits to increase the pH level. In that case, using pH plus comes in handy. Add two teaspoons per 1000 gallon water. Use a jug to dissolve warm water and distribute evenly throughout the tub water. Leave for a minimum of 2 hours and then retest the water to ensure that the pH level is between 7.2-7.6. Add more if needed. This pool chemical starter kit is the safest means of sanitising your hot tub without worrying about putting the excess in your pool. There are two ways you can put chlorine in the hot tub: Let’s jump right into information about hot tub chemicals so that you, as a customer, can be better informed. Hot tub chemicals basics Chlorine tabs contain Trichlor which is acidic. This means your pH and alkalinity will reduce when using these tablets, so you'll need to adjust the chemicals in your spa more often to keep it balanced. Filter Deep Cleaner. Filters need a lot of attention as their purpose is to protect the hot tub from bacteria and make bathing safe. A deep cleaner is an essential item for filter maintenance, as it will help to get rid of bacteria accumulated on your filter and will prolong its life. A clean filter is essential to get crystal clear water, free from germs.

The type on the left is the one that came with the kit, but is also a less sophisticated design. The top has an opening and the bromine tablets are placed inside. You twist the bottom to try to limit how much water can get inside, but it's not the most accurate mechanism. Water balancing.Maintaining correct water balance is an important part of hot tub maintenance. Poorly balanced water causes skin irritation and results in scale build-up and green foamy water. Also, it reduces the sanitizer efficiency, so you end up adding more sanitizer to keep the hot tub free from germs. To come up with a list of chemicals you need for the hot tub, our team conducted extensive research:

Frequently asked questions about hot tub starter kits

Whenever you fill your hot tub with fresh water, you need to add a variety of chemicals to 'balance' your water. This is so it's both safe to bathe in, and also safe for your spa's equipment. Poorly balanced water can lead to damage, scale, and even corrosion. It is easy to apply, and the instructions on the kit are simple and easy to follow. The kit includes: 1. Chlorine Dr. Karlovits Hot Tub Safety. Kids+ pediatrics: Doctor’s Notes. Retrieved from: https://kidspluspgh.com/doctors-notes/hot-tub-safety/ Don’t wait too long to compare, as the test strip colour will continue to change with time. Keep your test strips stored in a cool, dry place. I have full guides on how to use bromine or chlorine in your spa, based on my experience over the years. Floating Tablet Dispenser

Things like moisturisers, detergents, deodorants, makeup, and hair products mixed with water create foam. To control and prevent this foaming in your above ground pool or spa, you can use the foam remover. Test strips. Well-balanced water is the key to safe spa procedures. Test strips are an essential tool used in water balancing. Thanks to them, you can figure out what kind of chemicals (e.g. pH decreaser, pH increaser, TA increaser) you need to add to make the water clean and safe. If you face water problems like different colored water (green, yellow, white) or foaming of the water, test strips will help to find a reason that you can deal with. Jet Cleaner. Dirt can accumulate on hot tub jets due to continuous use. Jets are not easy to clean, it takes time to scrub all the dirt out of them. It’s much easier to use a product specifically made for this purpose. This will ensure that the jets run effectively and will also cut down on the cleaning time of the hot tub’s surface. You can then enjoy your hydromassage with a peace of mind that there are no germs in your jets. I've tried both, and I've not personally experienced any negative effects from using a metal reducer, but it's really up to you. Useful things to buy for ongoing spa maintenance Parts per million (ppm) is how chlorine is measured in. On average, chlorine levels should be between 1.5 and 3.0 ppm. 2. pH MinusYou can usually find the hardness of your local water supply online to get a rough idea of how much calcium you are likely to need. You can also buy a test kit just for hardness, or have your water tested at a pool supply store to find out the hardness of your exact water, which is probably more reliable than just guessing based on where you live. At first glance, it might seem that storing chemicals is pretty straightforward. I mean how hard could it be right? — Perhaps you just put the chemicals where there’s free storage space and take them from there when needed. However, it’s not that simple. If not stored properly, hot tub chemicals can lose their efficiency and pose serious risks for your health. Keep chemicals out of the reach of children. There are many cases of chemical irritants inhalation. If a child swallows or inhales certain chemicals like chlorine, it can cause serious poisoning. Prevention is better than cure. Ensure that all chemicals are out of the reach of children. Using the pH minus is very easy. Once chlorine is added to the water, the pH level is tested through the test strips, and if the pH level is high, pH minus is applied to the water to balance the level.