ZAC 1500W Continuous Laser Cleaning Machine 220V 1-Phase MAX Hand-held Fiber Laser Cleaner for Removing Rust, Paint, Oil, Coating Laser Cleaner Rust Removal Tool with 15m Optical Cable

Product Information

It is used to clean organic pollutants and inorganic substances for paint removal, paint stripping, rust removal, coating removal, glue removal, cultural relics restoration, and oil dirt removal. And it is used in precision mold cleaning, selective paint removal for weld inspection, historic masonry conservation, removing oxides, oil, grease & production residues.

The laser rust remover price is higher than other cleaning processes, for the same reason that the cost of jet fighters is higher than that of cars. They are more complex machines with higher design and manufacturing costs. The degree of technical sophistication is not even comparable.A system of mirrors inside the scanner collects the rays of light and then distributes them over the surface of the treated product. This allows you to clean relief surfaces, for example metal bars. The laser generator for laser rust removal is very complicated. It requires a very powerful pulsed/continuous fiber laser, which produces very short peak power and very high pulses that are repeated thousands of times per second (“Q-switched” solid-state laser). The laser itself contains many precision optical components, is expensive to produce, requires extremely precise alignment, and must be assembled and sealed in a dust-free environment to avoid catastrophic damage caused by microscopic pollution. Lasers also require sophisticated electronic power supplies and water cooling systems. Ability to clean surfaces made of combinations of different materials, for example steel products with leather trim. Removing rust with a laser is a far better alternative to many conventional cleaning techniques. Laser rust removal is non-abrasive to the surface, environmentally friendly, cost-effective and highly flexible if a portable system is used, such as the JETLASER series of flexible, handheld laser cleaning machines. Laser Paint Removal

The continuous laser cleaning machine uses the large difference in the absorption rate of the laser energy of a certain wavelength between the pollutants and the substrate, so that the laser energy is fully absorbed by the pollutants, so that the pollutants are heated to expand or vaporize. In the past ten years or so, with the advent of cheaper YAG lasers and the popularity of optical fibers, the price of such lasers has dropped significantly. I believe that in the near future, laser cleaning machine will slowly spread to thousands of households. To start working, you need to study the user manual and connect the equipment to the electricity supply. No special training is required. Service and maintenance No waste products whereas sandblasting creates a lot of dust, which should be collected together with abrasive - sand particles; Follow the switch sequence of the machine: turn on the water pump (water cooler) first, then turn on the power switch, and then turn on the laser switch. When shutting down, first turn off this switch, then turn off the power switch, and then turn off the water pump (water cooler).

from Einstein until today

Compared with traditional industrial cleaning systems, the unit cost of cleaning with laser is lower. The small footprint of the machine tool is an element of cost reduction. On the other hand, It only requires a few seconds to start up and are virtually maintenance-free. Laser cleaning equipment is mainly used to remove contaminants from metal surfaces. This method is suitable for removing rust, varnish, paint, organic substances, oils, soot, and other contaminants.

Laser rust removal is mainly based on the principle of laser cleaning to remove the rust layer on the metal surface; Sandblasting rust removal is the use of physical impact mode to spray sand particles from the nozzle and hit the metal on the metal to clean the surface rust layer. The laser cleaning machine also can be used in the non-metal industry to remove oxides and grease on the surface of the object, and can only remove the contaminants on the surface of the object without causing any damage for the object body. This handheld laser rust removal gun has high versatility and the max power is 2000w. The laser descaling gun includes a gun shell, a galvanometer scanning assembly and an iris assembly. It is required to clean regularly and quantitatively every day, remove the sundries on the table, limiter and guide rail, and spray lubricating oil on the guide rail. For the purpose of removing contaminants from various surfaces, we use fibre laser cleaning equipment. This equipment uses a laser beam to erode contaminants while leaving the surface intact. It is a safe, effective, and efficient way to clean fragile surfaces without causing any damage. It is also suitable for cleaning hard-to-reach areas. The following are examples, but not limited to:

It has strong flexibility and controllability. Through different parameter settings, the same laser beam cleaner can roughen the surface and improve the adhesion. Different powers, frequencies, apertures, and focal lengths can be set by preset effects, so as not to exceed the limits as little as possible, and only clean the required range and intensity to improve efficiency and reduce costs. Step 6. Wear eye protection goggles, take out the hand-held cleaning gun inserted in the chassis by hand, aim the gun head at the workpiece to be cleaned, press the orange button on the handle of the hand-held head with your fingers, and the gun head will emit light for cleaning. The lasr rust removal gun controller and motor driver adopt a modular design, which can be matched with a suitable cleaning solution.