Sika Aquaseal Waterproof Tanking Membrane, Blue, 5 Litre

Product Information

We always recommend the use of Tanking Tape on corners and board joints prior to applying the membrane to ensure the integrity of the watertight seal.

Aquaseal Waterproof Tanking Primer (1L) - For use before applying Tanking Membrane and Tanking Tape. Then we applied the Aquaseal primer with a 3 inch brush to the floor and the walls. This could be done with a bigger brush or even a fleece roller. A ready to use primer, applied by brush to all porous and semi porous surfaces in the areas that are to The flexible drain mat was then applied around the floor drain. This mat can also be applied around any inlet and outlet pipes in the walls and floors and allows for any expansion and contraction in the hot and cold water as it flows through the pipes of down the drains.Apply the first coat horizontally and allow to dry for 6 -12 hours then apply the second coat vertically. litre of liquid tanking primer (Styrene Acrylic based polymer) with a drying time of 1 – 2 hours depending on temperature of bathroom or wet room. For very porous surfaces, such as plasterboard, two coats will be required

Aquaseal Waterproof Tanking Tape 10MTR Self adhesive joint corner sealing tape. Easy to apply with pre-cut release liner. The membrane itself, despite being very thin (which allows it to flow onto the wall easily) is incredibly flexible as you would expect from any tanking system put into a high humidity area.The Tanking Drain Mat is also recommended around the drain outlet and to reinforce floors and floor joints which is the area most susceptible to leaks. Everbuild Aqualseal Wet Room Tanking System Kit for 4.5sq Metres What is in the Standard Size Aquaseal Wet Room and Tanking Kit From Everbuild? Waterproof tanking is the most important stage in any wet room installation. It’s essential to use high-quality, durable waterproofing systems to create a space that’s built to withstand constant wet conditions – and our wet room tanking materials are designed to do just that. For bonding and sealing joints, look no further than our tile grouts for protection against discolouration, water and mould.

Aquaseal Waterproof Tanking Tape (10MTR) - Self adhesive joint and corner sealing tape. Easy to apply with pre-cut release liner. Aquaseal Waterproof Tanking Membrane 5LTR Forms a permanently flexible watertight membrane, applied by brush, two coats. Then the vertical joints in the wall were sealed and all tape was pressed down thoroughly with the roller that is supplied with the wet room kit. As the video shows, we first made sure that the floor and walls did not have anything loose on them and swept the areas to be covered thoroughly. Pay careful attention to edges and corners to ensure that the coverage in these areas is always consistent as these are the potential weak spots where leakage could occur.

Pallet Delivery

The Aquaseal Wet Room System is designed to provide a permanently flexible watertight membrane prior to tiling. We’re the nation’s leading trade supplier with over 25 years’ experience. Whether you’re looking for internal or external tile adhesive, or even wood or tile on tile solutions, we’ll have a product that does the job. Tanking membrane suitable for 4.5 square metres of wall and floor. This is a liquid waterproofing compound that is applied in two coats. The second coat can be applied 6 – 12 hours after the first then after 24 hours the tiling can commence