About this deal
for some of them, they are reachablefrom a wired devices, while some other are not reachable anymore.
Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) GMAC0(de1d7cc0) Invalid MAC@ - using 8e:8f:90:91:92:93Initialized NSS GMAC0 interface eth2: (base = 0x37000000, irq = 252, PhyId = 32, PollLink = 0) https://community.tpg.com.au/t5/Home-Phone-Voice/Setting-up-Tp-Link-Archer-VR600v-modem-for-TPG-voip-telephone/td-p/30493 PPP over Ethernet (RFC2516), IPoA (RFC1577/2225), MER\IPoE (RFC 1483 Routed), Bridge (RFC1483 Bridge), PVC – Up to 8 PVCsI reboot the device (or the Archer) and everything starts working fine again. After a short time... The problem occursagain... With four Gigabit ports, the TP-Link Archer VR1210v supports the connection of gaming consoles, desktop computers or IPTV for 4K-ready speeds. It is also well suited to support the connection of IP telephones, enabling users to make or receive phone calls over the internet by simply connecting the device to their existing equipment.
Some VoIP providers may authenticate using the phone number, so please fill in the phone number field the same as the authentication ID. Then try registering again. Note: The Phone Number and Authentication ID are 6 numbers provided by your ISP, not your VOIP phone number. ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.On theotherhand, I've configured the internal networkinterface on the network 192.168.0.x with DHCP on the range 192.168.0.2 to 192.168.0.50.