FLSUN V400 3D Printer

Product Information

The printer comes pre-installed with Klipper firmware . Klipper provides a first-class printing experience and ensures high user friendliness – even via WiFi remote control! I also recommend using a microSD extension for future updates to avoid removing the cover each time. Firmware retraction gives an advantage compared to Slicer retraction, it can be modified during a print (from Mainsail or KlipperScreen) and therefore the same gcode can be printed with different parameters without the need to be re-sliced.

Motherboard Mount for Easy Access to microSd port: https://www.printables.com/model/268464-flsun-v400-motherboard-mount i)And wait until the bar is fully charged and green, this may take several minutes (10/15 minutes)：

Customer Reviews

The Flsun V400 is an extremely user-friendly Delta 3D printer. The 3D printer features extremely fast printing speeds of up to 600 mm/s and an acceleration of 10 000 mm/s². This saves you more than 70% of the usual printing time while still producing high-quality 3D prints. f)Once the image is written, turn off Speeder Pad if it is on and remove all devices plugged into the USB ports. Adjust Z-OFFSET, first you need to move to Z=0 and then adjust nozzle position with a sheet of paper. I have found 2 tools that use the spring force of a 3D printout as their functional principle. However, this spring force depends on the filament used, infill type and density, as well as the number of walls - all in all a rather random result.

To use ADXL345 with FLSUN V400 for measuring Resonances it's necessary to use it via USB with a Raspberry Pi Pico. Note: Flashing the imager will reset all configurations and lose all data on your pad so ensure you have copies of anything you may want to keep. To adjust manually Resonance Compensation, see here: https://www.klipper3d.org/Resonance_Compensation.html An easy-to-use 7-inch LCD touchscreen makes handling particularly user-friendly! The display is powered by KlipperScreen. The FLSun V400 is simple to use, fun to watch and can save you loads of time. I’ve used it a lot for prototyping parts for an RC car I’m building – in draft mode the printer can blaze through filament in a fraction of the time needed on a standard printer. The prints it produces at speed are still of excellent quality, so there’s no reason to limit it to only test prints.Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers.

The tool for adjusting the timing belt tension can also be used for the FLSUN Super Racer (SR), as the timing belt spacing is the same as for the V400. The measurement should be taken at mid-height, between the lower and upper bearing roller of the timing belt.

Inexpensive delta 3D printer with great features

Installation only takes a few seconds, to verify that the firmware has been successfully installed, the file on the microSD card must have been renamed to ROBIN_NANO35.BIN.CUR and the version on the System Loads tile must have been changed. With a 7-inch LCD touch screen, which is easy to use, handling is particularly user-friendly! The screen is powered by KlipperScreen . The correct toothed belt tension is indicated by a pointer that is vertical and parallel to the printer frame. In my case, this is achieved with 6 50 cent coins, i.e. 46.8 grams in weight. Számos 3D-nyomtató Bowden extruderrel van felszerelve, mert ez nagy nyomtatási sebességet biztosít, és a Direct Drive extruderrel ellentétben kisebb súlyt fektet a mozgó Hotendre. Az Flsun azonban valami egyedit alkotott a V400 nyomtatóval: a hotendet és az extruder házát kombinálták, ami egy különösen kompakt és könnyű rendszert eredményezett. Valószínűleg sikerült a piacra hozniuk az egyik legkönnyebb és egyben leggyorsabb Direct Drive extrudert! Then the new image was written to the SD card using Raspberry Pi Imager, inserted into a fully disconnected Speeder Pad and left to update (took about 20 mins). Finally all the calibration was done again but its easier with the new firmware. Bed Level now does both phases in one go and leaves you with a screen to set Z0. Then goto Config – Input Shaper – there is now an Auto Calibrate button – there is no need to comment out parts of the cfg files or do the SAVE-CONFIG – this is all now done for you.

A rendkívüli, 300 x 410 mm-es nyomtatási mérettel elképesztő nyomatok készíthetőek a legjobb minőségben! A V400 magas nyomtatási formátumokhoz is alkalmas! There are two variants to choose from - one with the weight on the right-hand side and one with the weight on the left-hand side. FLSUN V400 Adjustable Spool Holder: https://www.printables.com/model/274245-flsun-v400-adjustable-spool-holder Many 3D printers are equipped with a Bowden extruder because it ensures high printing speeds and, in contrast to a direct drive extruder, applies less weight to the moving hot end. But Flsun has created something unique with the V400: the hotend and the extruder have been combined, resulting in a particularly compact and lightweight system. They probably succeed in bringing one of the lightest and at the same time fastest direct-drive extruders onto the market! The Cura Profiles were updated by following the details in THIS file and a new V400 added to Cura (this is V400 #2 on my system and has 600mm/s as the max speed.For Cura, it's needed to install Klipper Settings Plugin (available here: Klipper Settings Plugin) and enable Enable Firmware Retraction setting like that: V400 motherboard doesn't support DFU mode, so it's not possible to install the firmware directly. It's therefore necessary to install it manually. With an exceptional print size of 300 x 410 mm, you can make amazing prints in the best quality! The V400 is also suitable for large print formats!