Heater Element for Bosch Washing Machine

Product Information

Step 4. With your Torx screwdriver, loosen the bolts holding the control panel to the front of the cabinet. Pry the panel off the cabinet using a flat-blade screwdriver. I am just wondering if its worth all the parts, I guess it would need new suspension legs as there is little resistance in them, maybe new springs (can they stretch?) a new heating element and a bearing kit, and could it of even warped the actual drum itself now? If you're considering replacing your washing machine, our guide to the most reliable washing machine brands reveals which brands are less likely to let you down, based on the data we've collected from thousands of washing machine owners. Step 15. Plug each wire connector into its appropriate terminal on the control panel. Snap the panel onto the cabinet, then apply the screws using your Torx screwdriver. Still nothing? The pump may be broken and need replacing or you could have an electrical fault. A technician can help with this.

The only downside to this is that washing on hot temperatures costs more. In our tests, we measure how much water and energy each machine uses, so we can give you an average running cost. Washing machine won't turn on or off My washing machine won't turn on Many appliance repairers will charge an initial call-out fee that typically covers the first hour - and is likely to be more if they live at a distance - followed by an hourly rate, depending on how long the job takes. The good news is that you can easily replace it yourself or hire a tradesperson to do it for you – just make sure you buy a timer that is compatible with your washer make and model. Now it’s time to take things apart! Thinking about the Bosch washing machine not heating water step by step, the problem could be:

The way it looks to me is the swinging has taken its toll on ether the bearing or warped the drum I guess, if you take a look on the Youtube video the drum is not turning true anymore and its its worn through the heating element. I couldn’t find reference values for the thermistor, but was happy to see a resistance value that decreased as I warmed the sensor in my hand. All prices below include labour and materials but exclude VAT, and are based on a standard, mid-range appliance. Completion times are based on the trader already having any necessary parts needed for the repair. Now, inspect the drain hose. Typically attached to the waste trap under the sink, the drain hose will be connected via a spigot.

If your machine is out of warranty and guarantee and needs a repair, find a trusted appliance repairer near you using Which? Trusted Traders. More on this Step 9. Note the positioning of each electrical connector attached to the heating element, the disconnect each one. Step 4. Wedge a flat-blade screwdriver under the retaining band around the door gasket, then work it around until the entire wire comes off.Step 6. Pry the lower front access panel off the machine, then set it aside. Open the door of your machine.

I was asked to take a look at my mums Bosch 2007 WAE24162UK Classix 6 machine after she told me it was tripping the electrics, she also said it had been banging loud on spin the past couple of weeks before Drain the water using either the hose provided (if there is one) or by unscrewing the cover on the pump impeller. Step 6. Using your Torx screwdriver, loosen the bolts holding the control panel to the front of the cabinet. Pry the panel off the machine. You might want to take a look at our guides on how to fix common washing machine problems and tumble dryer maintenance tips in case you're able to rectify the issue yourself.Pull the seal away from the front panel and poke it inside so it doesn’t catch when the panel is removed. A washing machine that doesn't clean your clothes is far from ideal. But it happens – and more often than you'd think. Drive belt – Find out if the drive belt is the root of the problem by opening the door and trying to spin the drum. There should be some resistance – if the drum turns easily then the belt might need replacing. In this post I’ll take you through diagnosing the fault and fixing it….which on this occasion turned out to be replacing the heating element. I did this job on a Bosch WAE24464GB/03, but I’m sure the process described would be similar for many other models. Tools required As well as looking unpleasant, if it builds up it can prevent detergent from being washed into the machine and water entering the drum.