Lithofin MN Stain-Stop Impregnator Sealer For Artificial & Natural Stone 250ml

Product Information

Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings. A special product from the LITHOFIN-Range for marble, natural and concrete stone (MN). Lithofin MN Stain-Stop contains high quality water and oil resistant components based on alkoxysilanes. colour. The water absorbency of the stone is greatly reduced; the water permeability is only slightly affected. The product is UV-resistant and does not yellow. Outdoors, the colour intensifying component lasts for one to two years, depending on the type of stone and the weather. The protective component will last for about three years. Indoors, the durability depends on the care products used. Strong degreasing agents and layer forming products are not suitable. For regular maintenance, we recommend MN Wash & Clean which supports the effect of the product. Disposal: liquid product is classified as special waste. Containers are made of environmentally friendly tin plate. Clean containers can be recycled through collection systems.

Find the answers to your common questions regarding the sealing of tile, grout, and natural stone here by chatting to one of our team of experts now. Perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces. The durability depends on the care products used. Strong degreasing or layer forming products are unsuitable to use. Heavily used surfaces such as kitchen counters should be retreated once a year. Always try the product in an inconspicuous area prior to use. The surface to be treated must be completely dry and clean. Working in small areas (10 to 15m²) apply product generously and evenly until the surface appears wet. After 30-40 min. surface will be dry and ready to be stepped on. Complete drying process and effectiveness of the impregnation will take approx. 5 days. During this time, do not cover the surface and wipe up any spills immediately.

Lithofin Stainstop PLUS

Advice: immediately remove stain causing substances. For regular maintenance of floors we recommend Lithofin MN Wash & Clean, for kitchen counter tops Lithofin MN Easy-Clean. Lithofin Stain Stop PLUS sinks into the stone and reduces the capillary absorbency so water, oil and grease can no longer penetrate the surface. These materials remain on the surface and can be wiped off before they cause stains. In addition to protecting the stone, it darkens it – thereby invigorating the colour structure.

Lithofin MN Stain-Stop is a special impregnator invisible sealer that provides optimal protection for absorbent natural and artificial stone surfaces against staining. It prevents penetration of oil, grease, and water and makes further maintenance easier. When used on work surfaces the product is food safe once dry. Lithofin MN Stain-Stop does not leave a gloss finish and remains effective for many years.

You May Also Like

Attention! the liquid product must sink into the stone. Do not allow the product to dry on the surface. Wipe off excess product within 15 min. Lithofin MN Stain Stop is a special sealing product from the LITHOFIN-Range for marble, natural and engineered stone (MN).