Cable Matters 8K Retractable HDMI Cable 3.3 Feet

Product Information

FT2A‑CBLR‑1T‑4K‑MDP‑HD: Cable with a male Mini DisplayPort connector at the source end above the table and a male HDMI Type A connector at the sink end below the table; converts Mini DisplayPort to HDMI to allow connection of a Mini DisplayPort source to an HDMI input. 1 NOTE: Crestron does not offer a USB power supply. A third-party power supply must be used with the device.

ft (1.4 m) beneath table except for models FT2A‑CBLR‑1T‑4K‑DP‑HD, FT2A‑CBLR‑1T‑4K‑MDP‑HD, FT2A‑CBLR‑1T‑4K‑USBC‑HD, and FT2A‑CBLR‑1T‑USBC‑PWR, which are 2.75 ft (0.8 m)

models available to convert from DisplayPort™ to HDMI® connectivity, Mini DisplayPort to DisplayPort, Mini DisplayPort to HDMI, and USB-C® to HDMI connectivity Allows connection to a control system via the Cresnet port on the FlipTop, supports remote actuation of the retraction function All retractable cabling has a specific retraction force that can have an impact on what you can use the cable for. Retractable cables are primarily for cable management purposes. You buy a retractable cable because you want to run your devices together without having to deal with excess cabling. If you decide to plug your monitor in via retractable HDMI, you want to make sure that the cable is both long enough and does not have enough retraction force to pull your monitor out of place. Also, to ensure your cable and ports last long, you want to make sure the force applied to your ports is not overwhelming or at odd angles. Cable Type & Application Retractable HDMI smooth ribbon cable retracts from 43 inches to 3 inches for tossing in your laptop bag; Provides connectivity on the road in a conference room, classroom, hotel room, or an RV If laptop or Blu-ray to (monitor) projector or TV is fine, no need to call. Call for our 1.4 HDMI reels work for 4gbps and 10.2gbps in 3D and 720, 1080i or 1080p, 4k at 24 fps which is standard now. Blu-ray HDMI max is 54Mbps.

Module requires two consecutive module slots at the left or right end of any module row within the FlipTop chassis; retractable HDMI cable reel 15' foot HDMI cable reel -- Call for optional longer pigtails (non retracting side) Automate one-touch retractors by connecting the retractors in a FlipTop to a control system and a switch or to a DMPS via a single Cresnet cable. Custom programming can trigger all the cables to retract after five minutes of no video being detected.The following 4K compatible cables offered feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance. Like the Cable Matters HDMI, this has the same shell-like design. The exposed cable at the outer edges of the central body opens the potential for tangling. Fully extended, the Tera Grand HDMI cable reaches 4.25 feet. Again, due to the similar design, you are advised against pulling on just a single end of the cable. That way you can avoid breaking the coil in the central housing. Fully retracted, this cable has a length of under six inches and thus is very portable. Other Considerations When you are purchasing an HDMI cable, you have to think about what you want to use it for. There are about eight different HDMI cable types that currently exist. All of them are primarily based on just two certification standards: Standard & High-Speed. What you plan to use your cable for will be the deciding factor in which cable suits your needs the best. FT2A‑CBLR‑1T‑4K‑USBC‑HD: Cable with a male USB Type-C® connector at the source end above the table and a male HDMI Type A connector at the sink end below the table; converts USB-C to HDMI to allow connection of a USB-C source to an HDMI input. 1

FT2A‑CBLR‑1T‑VGA: VGA cable with a male HD15 connector at both ends; supports resolutions up to Full HD 1080p. retractable HDMI cable reel 25' foot HDMI cable reel -- Call for optional longer pigtails (non retracting side) Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource. The cable tail beneath the table is 4 ft (1.2 m) long on all models except for FT2A‑CBLR‑1T‑4K‑DP‑HD, FT2A‑CBLR‑1T‑4K‑MDP‑HD, FT2A‑CBLR‑1T‑4K‑USBC‑HD, and FT2A‑CBLR‑1T‑USBC‑PWR which are 2 ft (0.6 m) long. Each One-Touch Cable Retractor is composed of a retractor enclosure and pass-through module. The enclosure attaches to the FlipTop chassis beneath the table, while the module installs in the top of the FlipTop. A cable tail is provided below the table for connection to a DM® transmitter or similar interface device. 1

FT2A‑CBLR‑1T‑4K‑DP‑HD: Cable with a male DisplayPort connector at the source end above the table and a male HDMI Type A connector at the sink end below the table; converts DisplayPort to HDMI to allow connection of a DisplayPort source to an HDMI input. 1 This is a cable a bit, unlike the previous two. First off, it is the shortest of the three and has an entirely different retraction method. You still get full #D and 4K video support as well as the usual audio return channel function. Of course, you get the Ethernet over HDMI ability as well, so as far as HDMI features are concerned, all three are on par with one another. FT2A‑CBLR‑1T‑USB: USB 2.0 cable USB Type-A male to USB Type-B male under the table to support connection to a codec or extender. This HDMI cable can support both 2k and 4k video with resolutions up to 4kx2k, which is considered Ultra-High Definition or UHD. Supported UHD resolutions include: 4096×2160, 3840×2160, 2560×1600, 2560×1440, 1920×1200, and 1080p. This cable supports high-speed data transfer with audio return channel (ARC). ARC is an HDMI feature built into man video streaming devices that allows the HDMI to send audio along with video and is a feature of most HDMI cables. It has a 48-bit deep color and 32 channel audio along with 3D video support. Build & Design