3M IEC C7 Figure of 8 Eight Mains Power Cable Lead - 3 Metre Long (Black)

Product Information

IEC 60320-3: Standard sheets and gauges. [4] First published October 31, 2014, this part initially included the standard sheets for both appliance couplers and interconnection couplers. In a 2018 amendment, the standard sheets for the IP couplers defined by 60320-2-3 were added. [9] For appliance couplers the various coupler outlines are designated using a combination of letters and numbers, e.g., "C14". The connector supplies power to the appliance inlet. The appliance inlet is designated by the even number one greater than the number assigned to the connector, so a C1 connector mates with a C2 inlet, and a C15A mates with a C16A. Interconnection couplers have single letter designators, e.g., "F". They consist of a plug connector and an appliance outlet. The plug connector is the part integral with, or intended to be attached to, the cord, and the appliance outlet is the part integrated with or incorporated into the appliance or equipment or intended to be fixed to it, and from which the supply is obtained. A similar but polarized connector has been made, but is not part of the standard. Sometimes called C7P, it is asymmetrical, with one side squared. Unpolarized C7 connectors can be inserted into the polarized inlets; however, doing so might be a safety risk if the device is designed for polarized power. Although not specified by IEC 60320, and not clear whether any formal written standard exists, the most common wiring appears to connect the squared side to the neutral, and the rounded to the hot line. [23] [24] Note: Clause 9.5 was added to IEC 60320-1:2015, this requires that "It shall not be possible to engage a part of a non-standard appliance coupler with a complementary part of an appliance coupler complying with the standard sheets in any part of IEC 60320." Additionally, many people first bought into Ethernet connectivity fairly early on in the home hub era (around the Cat5 cable revision or earlier), and naturally look to the latest versions when needing to replace or upgrade older cables. Those planning to wire a smart home today, for example, might typically gravitate towards Cat7 and Cat7a as a future-proofing measure, anticipating the continued acceleration of home hardware and connection speeds over the coming years. Connector: "part of the appliance coupler integral with, or intended to be attached to, one cord connected to the supply".

IEC 60320-2-3: Couplers with a degree of protection higher than IPX0 [7] specifies couplers with some degree of liquid ingress protection (IP). In its second edition published in 2018, the standard sheets were moved to IEC 60320-3. Australian/New Zealand Standard AS/NZS 60320.1:2004, Appliance couplers for household and similar general purposes Part 1: General Requirements (IEC 60320-1, Ed. 2.0 (2001) MOD). This is the Australian version of the IEC standard with national variations shown. Commonly known as a "figure-8", "infinity" or "shotgun" connector due to the shape of its cross-section, or less commonly, a Telefunken connector [21] after its originator. Also known as the “Figure-8” or “Shotgun” connector, very widely used on an array of devices such as TVs, Blu-ray players, and laptop chargers. This is polarised. There is an un-polarised version of the C7 that has a flat edge on one side of the figure-8 shape. The C7 connector is typically used on a mains cable; the C8 connector is used on the device / power supply. View the range of Lindy IEC C7 mains cables here. Appliance inlet: "part of the appliance coupler integrated as a part of an appliance or incorporated as a separate part in the appliance or equipment or intended to be fixed to it".a b "IEC 60320-3:2014+AMD1:2018+AMD2:2022 CSV | IEC Webstore". webstore.iec.ch . Retrieved 2023-05-13. The C13/C14 connector and inlet combination are used in a wide variety of electronic equipment ranging from computer components like the power supply, monitors, printers and other peripherals to video game consoles, instrument amplifiers, professional audio equipment and virtually all professional video equipment. An early example of a product that uses this connector is the Apple II. A power cord with a suitable power plug (for the locality where the appliance is being used) on one end and a C13 connector (connecting to the appliance) on the other is commonly called an IEC cord. Standard sheet C25 shows retaining device dimensions. Sheet C26 shows detail dimensions for pillar-type terminals, where the end of the screw bears on a wire directly or through a pressure plate. Sheet 27 shows details for screw terminals, where the wire is held by wrapping it around the head of a screw.

International Standardized Appliance Connectors (IEC-60320) Reference Chart Includes diagrams of all couplers, their rated current, equipment class, and temperature rating. The mains appliance couplers are all engineered to connect an appliance via a power cord to mains power. Connectors are also classified according to the method of connecting the cord, either as rewirable connectors or non-rewirable connectors. Xbox One [19] and some Xbox 360 power supplies, [20] some vacuum cleaners, CPAP machines, audio equipment, televisions, medical devices, IBM Wheelwriter typewriters. In rare cases, the power cable may be damaged or non-functional upon arrival. Don’t panic. Immediately notify Sony of this misfortune, and you will be attended to because of the product’s warranty. Nonetheless, this would only work if you immediately reach out and if the AC cable is nonfunctional as a manufacturing defect. Here’s some friendly advice- having an extra C7 connector cable will do you a lot of good. Using a different power cord for your PS4Pin temperature is measured where the pin projects from the engagement surface. The maximum permitted pin temperatures, are 70°C (158°F), 120°C (248°F), and 155°C (311°F), respectively (the higher temperatures are not applicable to interconnection couplers). The pin temperature is determined by the design of the appliance, and its interior temperature, rather than by its ambient temperature. Typical applications with increased pin temperatures include appliances with heating coils such as ovens or electric grills. It is generally possible to use a connector with a higher rated temperature with a lower rated appliance inlet, but the keying feature of the inlet prevents use of a connector with a lower temperature rating. Interconnection couplers are similar to appliance couplers, but with the gender roles reversed. Specifically, the female appliance outlet is built into a piece of equipment, while the male plug connector is attached to a cord. They are identified by letters, not numbers, with one letter identifying the plug connector, and the alphabetical next letter identifying the mating appliance outlet. For example, an E plug fits into an F outlet. Beginning with an amendment published in 2022, three of the commonly used high temperature variants have been standardized as types M–R. [26] We often find that people are unsure of the difference between mains power cables, or what the IEC standards are. To put it simply, the standards define the mechanical, electrical and thermal requirements and safety requirements of power couplers. The C6 inlet is used on laptop power supplies and portable projectors, as well as on some desktop computers, some LCD monitors and recent LCD televisions from LG. IEC 60320-1 defines a cord set as an "assembly consisting of one cable or cord fitted with one plug and one connector, intended for the connection of an electrical appliance or equipment to the electrical supply". It also defines an interconnection cord set as an "assembly consisting of one cable or cord fitted with one plug connector and one connector, intended for the interconnection between two electrical appliances".