Bicycle Light Silicone Straps Cycling Bicycle Rubber Straps Light Silicone Mount Band for Front Light Bicycle Light 2 Pcs

Product Information

Straps to be installed at not more than 2m centres (or 1.25m where appropriate) along pitch of gable end. Where straps are fixed to masonry, hardened nails Ø4mm x 75mm long or wood screws into plastic plugs Ø5.5 x 50mm long should be used. The lowest fixing should be located within 150mm of the bottom of the vertical strap. If you prefer to run in the early morning or late at night, an effective running light is an essential piece of gear. Not only can powerful models illuminate the path ahead to help you avoid tripping hazards, running lights also alert drivers, pedestrians, and other runners to your presence. And proper running lights sit snugly on your body or your gear as you stride. Ideally, you won’t have to fuss with them during your workout. It has a rubber strap that’s attached permanently to the bottom of the light, which is perfect for those who lose light straps frequently.

The Swift is made with robust rubber and fibreglass to ensure it can handle the rigours of daily use. Fix straps to noggings/trusses with eight 3.75 x 30mm square twist nails, evenly distributed along the length of the strap. (For NHBC warrantied buildings, in accordance with NHBC Standards 2017, section 7.2.8, four 50mm (minimum) x 4mm steel screws or four 75mm x 4mm round wire nails, with one fixing into the third rafter, shall be used instead of the square twist nails). My commute is 20 minutes each way, so this didn’t bother me much, but if you are likely to be out longer, it’s something to take into consideration.

The battery-level indicator is also very simple and the light system made it easy to remind myself to recharge the light. Example: Heavy strap that has an overall length of 1m, a bend at 10cm and a twist at 20cm. (See illustration for detail on measuring bend & twist dimensions). For seeing, we recommend a light with a high lumen count—200 to 500 is ideal—and a steady beam. Some fancier lights can also switch between a spotlight and a floodlight, allowing you to change your depth of field on the fly if you’re changing speeds. The one issue: A steady beam isn’t always going to catch the attention of others, even if it’s bright, so it’s not best to bring only this light on a road run, especially if you run in the street.

Recharging is via micro-USB. I found it took around two hours to charge fully, which is pretty good. On the other hand, if you want the light to follow your line of sight and illuminate potential tripping hazards, we recommend a headlamp or chest-mounted spotlight that you can more easily reach to adjust on the fly. Waterproofing With the medium or low beam, the light lasts much longer, of course. It’s also great to see it includes a walk (and daylight) mode, which is handy for staying visible when riding in the light.On the other hand, other lights are made for conditions where you simply need to catch the attention of others, even in better-lit environments like a lamplit street. These LED lights usually offer several different settings, like a flashing or strobe mode, and are more set-it-and-forget-it type lights. These products, however, won’t provide the same all-round illumination as more powerful headlamps and dedicated spotlights. Mounting Options It carries an IP64 ingress protection rating too, the ‘4’ indicating it should handle downpours very well.