Makita LS1018LN/2 240V 260mm Slide Compound Mitre Saw

Product Information

některé díly, které se zdají být solidními hliníkovými odlitky, jsou ve skutečnosti plastovými díly (stavitelné rozšíření stolu) To ensure the utmost accuracy, Makita have fitted the LS1018LN/1 with a laser guide rail and offer a max bevel range of 45 - 45 º to really get into those intricate cuts. Safety hasn't been neglected as Makita have equipped this saw with an electric brake and a soft start function to minimise the chance of the blade causing injury. Weighing in at 20.6kg this product is surprisingly lightweight and is sold as a single unit.

The Makita LS1018 as mentioned, is a sliding miter saw. This means it has extended crosscutting and miter cutting capabilities. Overall people find this saw very smooth, very accurate, and very much worth the money. This is why it has retained a high user rating in the online market for a long time. The Makita LS1018LN/1 110V 260mm Slide Compound Mitre Saw Laser will prove valuable to professionals such as carpenters and kitchen fitters. The powerful 110V motor has an input wattage of 1430W and a no load speed of 4300rpm to make short work of crosscuts and mitre cuts. This saw excels at cutting through wider materials and structures, such as boards and frames, thanks to its 260mm blade with a 30mm bore diameter. The DIYer can get a lot out of this saw as it would handle about any home-improvement job you could throw at it. Basically, the same benefits as applied to a contractor, only you may not put as many hours on it. You can adjust this saw’s miter angle up to 47° left, and 60° right. These are good ranges and should allow you to achieve just about any kind of miter you would need. The MotorPři koupi pokosové pily jsem chtěl stroj do 10-ti tisíc, který by uměl dělat přesné řezy na truhlařinu. Bohužel všechny stroje v této cenové relaci jsou spíše hrubější tesařské práce. Po shlédnutí některých pil přímo na prodejně jsem se rozhodl jít do této Makity.

It also can handle a 45° miter cut thru an 8-1/2″ board. So again, really good capacities on the crosscut.This saw offers a lot of features for a lot of people. However, the manufacturer had professionals in mind when they designed it. stavěcí šrouby úpinky jsou sice zašroubovány v hliníkovém dílu, ale po jeho obrobení, číňan nevyfoukal špony, šrouby namazal a namontoval. Vše drhnulo, musel jsem závitové spojení rozebrat, odmastit, vyčistit a opět namazat a složit Thestandard (somewhat poor) dust collection is one of the negatives most people notice. However, this has not been a deal killer for anyone that I’ve seen. It’s built to last and has a decent warranty for the price tag. I would say for non-professionals, this tool will probably last a really long time. The Makita LS1018LN 240V 260mm Slide Compound Mitre Saw Laser will prove valuable to professionals such as carpenters and kitchen fitters. The powerful 240V motor has an input wattage of 1430W and a no load speed of 4300rpm to make short work of crosscuts and mitre cuts. This saw excels at cutting through wider materials and structures, such as boards and frames, thanks to its 260mm blade with a 30mm bore diameter.

But at the decent price and low weight, the do-it-yourselfers can still reap great benefit without spending an arm and a leg. It goes beyond standard on its miter capabilities, plus it’s a dual bevel, meaning you can change the angle of the blade instead of flipping the workpiece over. Contractors tend to love this feature. Today I’ll be writing the Makita LS1018 review – This is a high quality, highly rated sliding compound miter, built with the professional user in mind. Miters 0° - 47° left and 0° - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right) However it’s decently priced, and DIYers, hobbyists, and woodworkers can also get great benefits from this toolJe to bohužel moje první Makita, která mne svým zpracováním zklamala. Konstrukce výrobku je v zásadě fajn, ale vlastní zpracování mnoha detailů je nečekaně mizerné. Uvedu pár příkladů: Double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut As you can see, it’s a dual bevel saw. You can bevel left and right, both to 45°. While I would prefer a slightly extended bevel range, say to 47°, the 45° is industry standard and this will take care of 95% of most peoples beveling needs. This particular saw can cut a 12″ wide board at 90°– so it’s great for shelving, wide dimensional lumber, plywood (see photo above), etc. And to conclude my Makita LS1018 review I would add this: The saw literally has great features for just about any type of user.

And while it doesn’t quite have the vertical board cutting capacity of the Dewalt DW717, it still has a decent fence and can handle most crown molding and baseboard jobs.

Celkově si myslím, že tato pila není sice z nejlevnějších, ale v poměru cena/výkon a hlavně přesnost dává smysl.