Powerextra Replacement DJI Phantom 3 Battery,15.2V 4480mAh LiPo Intelligent Battery Fit for DJI Phantom 3 Standard Advanced Professional and 4K Drones

Product Information

I found that there are two main reasons that might be causing this connection issue. Your drone might not be charging because of: You can fix your Phantom 3 LiPo battery that is not charging by using a multi-functional charger. Start by charging the battery at 0.1A using a NiMH charger. Once it’s recovered to around 2-3 volts per cell, you can switch to the LiPo setting and balance the charge of the battery until it’s fully recovered. 3. Overcurrent Protection

Insert the battery to the aircraft, connect the USB-C charger or PD fast charger to the USB-C port of the aircraft, and the Battery Level LEDs in an array blink successively. The charging time for one battery is approximately 1 hour and 22 minutes by using the DJI 18W Charger. After fully charged, the four Battery Level LEDs are on. Detach the charger after charging is complete.If the battery keeps flashing red after red, that means the charger isn’t providing power to the battery. I also had this problem a couple of weeks ago, when I plugged my Phantom 3 to its charger nothing happened, then I went on google to look for a solution but I didn’t find a clear answer.

Never let your drone battery get wet, if your battery is soaked in some water you should dispose of it immediately. As soon as the voltage of your Phantom 3 battery rises to above 3.3 V per cell, you can move it to a Lithium Polymer balance charger. Here, you should be able to balance the battery charge at a 0.5 C rating. As soon as the balance charge completes balancing, the battery will be fully recovered.

Once the voltmeter reaches above 20.00V, you can reconnect the balancing plug and recharges the battery as per normal. Keep reading. I’ve laid out a step-by-step troubleshooting process below that will help you fix this issue as soon as possible. Let’s get started. 01. Faulty or broken charger After flying - give the battery at least 10 minutes to cool down before charging. The heat can build up in LiPO batteries so ensure you let the temperature drop before starting to charge, which can increase temperatures. There are two ways you can do this. I’m using a DJI in the steps below, however, the steps should be similar on all drones.

When used with the DJI 30W USB-C charger, the battery charging hub can fully charge one battery in approximately 56 minutes and one Intelligent Flight Battery Plus in approximately 78 minutes. After the battery is fully charged, the corresponding LEDs will change to solid green. The battery can be disconnected from the charging hub when charging is complete. If your Phantom 3 batteries are not charging it means the batteries are in hibernation mode, so it is recommended you give it at least 3-4 hours before going further. You can use a more powerful charger to get it out of hibernation mode faster, the battery supports 12V-1.5A, 9V-2A, and 5V-3A. It is not recommended to fly in very cold environments (i.e. air temperatures below minus 10 degrees and 5 degrees Celsius).Drone batteries, like many other accessories in the drone industry, have received a lot of advancements in the past couple of years. Nowadays drone batteries can give you live updates. Notice that the batteries will only charge when the temperature is between 5° C – 40° C. If it is too cold or too warm, it may refuse to charge. To fix the problem, leave it at room temperature for a period of 30 minutes or one hour. You can then plug the battery into the charger and allow it to charge. Short Circuit

Drone batteries are made of lithium polymer and utilize advanced technology, requiring rigorous maintenance and storage routines. Most of the batteries are light and easily rechargeable. This is why drone manufacturers find it appropriate to use them in aircraft. However, Phantom 3 batteries can sometimes let you down by refusing to charge. So, what are some of the reasons these batteries may fail to charge? This is really not important if you have already refreshed the firmware, but just in case there is still some error in the software that hasn’t been solved with a firmware refresh. Do not charge battery immediately after flight, because the battery temperature may be too high. Do not charge the battery until it cools down to near room temperature. Charging battery outside of the temperature range of 0℃-40℃ may lead to leakage, overheating, or battery damage. The charging hub can use the power accumulation function to transfer the remaining power of multiple low-power batteries into the battery with the highest remaining power. Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PADYou can try factory resetting the drone with the battery that is having problems to start of with clean software.