DYLON Washing Machine Fabric Dye Pod for Clothes & Soft Furnishings, 350g – Olive Green

Product Information

For best results read full instructions and helpful hints before starting. The shade you will achieve depends on 3 things: When cycle is complete, remove the empty pod from the machine. Add washing detergent and run another cycle (same washing settings as the first). You can also select a convenient day to receive your delivery by choosing a named day delivery (delivery on working days only). White – the opportunities are endless! Dye white fabric any color you want and it’ll come out the same color as the dye says it will, which is quite handy!

In other cases – like an old high school t-shirt or hoodie – the printing is done using screen printing ink which (in most cases) has a polymer base and sits on the surface of the shirt. This ink can sometimes absorb polyester dyes, but it won’t absorb dyes meant for cotton, silk, or wool. This means that if you overdye a yellow shirt with a red print on it in blue dye, the result will be a green shirt with the same red print. As with any overdye project, if you’re aiming for a particular color on a garment like this, it’s always best to test first! Although a dye may not absorb into a polymer-based ink, it may lightly stain the ink enough to be noticeable. Tips for overdyeing t-shirts, hoodies, and jeans: Wool, silk, fully synthetic fibres (polyester, acrylic, nylon) and fabrics with special finishes or membranes (e.g. ‘dry clean only’ ‘waterproofing’ or ‘fire retardant’, etc.) cannot be dyed. Overdye” is the word dyers use to describe layering dye baths on top of each other. This could mean that you use multiple dye baths one after another to build a depth of color, but it could also mean dying an existing non-white garment to a new color. Aside from adding depth, texture, and new tones, it’s also an incredibly useful way to breathe new life into old garments, disguise stains, and update garments to a color you’ll actually wear. Another thing to keep in mind – one that doesn’t add any complexity but may add one extra step – is that if you’re working with a previously worn garment, you’ll want to pay special attention to pre-washing and stain treatment. Stains that are visible or barely visible can show up in a freshly overdyed garment. You’ll want to pre-wash and stain treat thoroughly, but also keep in mind that these areas can absorb dye differently. If you have, for example, spattered oil or tomato sauce all over the front of a shirt, you may wish to consider a scrunch-dye, tie-dye, or low-immersion dye bath that will add some texture to disguise these stains, as overdyeing them in a solid color is unlikely to completely hide them, even if the stains are very light and you’re planning a very dark color.It’s easy enough to understand that a red shirt in a blue dye bath will result in a purple shirt, but what happens if you’re not starting with a primary color, or when there’s not a clear mix available? Unfortunately, there’s no magical overdye color that will help you turn a pair of dark brown pants neon yellow. In general, overdyeing only allows you to go darker, not lighter, and you’re always going to be limited by the color of the garment or fabric you’re starting with. If you’re set on a lighter color, you can always pre-treat your fabric or garment with bleach to lighten it, but do keep in mind that bleach can damage fabric in large quantities so always test a swatch first! It is no more complicated to overdye fabrics than it is to dye white items. You still have the same choices of dye depending on the fiber content of your garment or fabric, and you still need the same supplies as you would with any other dye bath. The added layer of complexity comes only in the planning stage. If you’re starting with a garment or fabric that has a color already, and you’re trying to arrive at a particular color, you’ll need to do a bit of planning (and potentially testing!) to figure out what color you need to use for your overdye bath. Pay attention to the type of pattern your fabric has before you decide whether it’s a good candidate for overdyeing. Printed fabrics – things like floral sheets or polka-dot dresses, are usually printed (or yarn-dyed) using a pigment dye that absorbs into the fabric. When you overdye this fabric, each existing, original color will mix with the overdye. For example, if your original fabric is pink with yellow flowers that have green leaves and you add it to a red dye bath – the fabric will become red (or reddish pink) with orange flowers and muddy brownish leaves. This may or may not be the result you’re going for, so think about how the dye will mix with each individual color before you commit to overdyeing. In natural dyeing, Overdyeing is used to create colors with dyes that might interact badly with each other if they were mixed directly, and it’s also used to update colors that fade over time. Is it easy to overdye fabric and clothes? Remove fabric, add detergent and run empty cycle to remove any remaining traces of dye (at 40˚C or 60˚C).

Red – create purple using blue dye, orange with yellow dye, or a range of deeper, subdued colors with darker dye colors in high quantities. Jeans are an interesting case. Traditionally, denim is made with two different colored threads combined in a twill weave. One is indigo blue, and the other is white. If you overdye jeans in, say, hot pink (I’ve included a photo) – the white will absorb the pink as-is, and the blue will absorb just a tiny tint of warmth from the pink, resulting in an overall purple effect. A friend of mine has done this in lime green as well. The dye isn’t powerful enough to change the color of the blue, but the overall tint of the fabric changes ever so slightly since the white threads are no longer white. How to overdye fabric: Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Dyeing to a lighter colour, or changing from one strong colour to another, is only possible by using DYLON PRE-DYE first. Place damp, unfolded fabric into the washing machine drum. Always start with clean fabric (wash thoroughly, even if new, to remove stains or any finishes that cannot be seen).

How to choose the right dye color when overdyeing:

NOT SUITABLE FOR: Wool, silk, fully synthetic fibres (polyester, acrylic, nylon) and fabrics with special finishes or membranes (e.g. ‘dry clean only’ ‘waterproofing’ or ‘fire retardant’, etc.) cannot be dyed. Yellow – a great base for green (when combined with blue) or orange (when combined with red). Lighter yellows can also occasionally be ‘overpowered’ with enough blue dye to create a slightly greenish-tinted dark navy blue, for example, although this isn’t always possible. It is possible to dye over patterned fabric, but the print itself may turn into unexpected colors, or stay the same color, depending on how it was printed. How to dye Cotton or Linen (we recommend fiber-reactive dyes, but instructions for box dyes are also included) Pink – treat pink the same way you would treat red, but keep in mind that lighter shades will require less dye to mix with them so you’ll likely need less dye than you would if you started with a darker red.