Humanscale M2CW1S M2 Monitor Arm Aluminium (Max Load 9.1 Kg), Polished White

Product Information

Support for multiple monitor sizes: Because 27-inch monitors have become so common— they don’t cost much more than smaller displays—we considered only monitor arms that could handle a screen at least that size. All the models we tested can work with smaller displays, and a few can even hold larger displays, up to 34 inches. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M10 enables the personalisation and flexibility needed for today’s evolving workplaces.

We’re not a fan of the arm’s installation. It has two clamps instead of one unified clamp, which is strange, because the base of the monitor arm is one solid piece. There are roughly a dozen screws to install. And the included cable routing can prove hard to tighten once several cables are held within the routing.To conclude, in my opinion, there’s one clear winner when it comes to comparing the best microphone boom arm stands – the RODE PS1. This is due to its all-round quality. Not only is it durable and sturdy, but it also has a full range of motion and has a classy design. The Huanuo HNDS12 represents a middle ground for shoppers who want an upgrade in quality but need to respect their budget. It’s natural, given the only slight difference in name, to think the Ergotron HX is merely an uprated version of the Ergotron LX. That’s not the case. This is an entirely different monitor arm which pairs its increased capacity with improved build quality and a more professional look.

Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M8.1 enables the personalization and flexibility needed for today’s evolving workplaces. Instead of using a gas cylinder to counterbalance the weight of the monitor, the M2 monitor arm uses extension spring technology. Without clunky mechanisms to complicate the design, the M2 offers uncompromising lightweight, long-term durability and an ultra-thin design that complements flat-panel monitors and attachments for a truly flexible workstation. Humanscale M8 Monitor Arm It’s easy to set up and use. The monitor’s clamp works similarly to other monitor arms I tested, but it’s more refined and requires fewer screws (a grommet is also available). The VESA mount is also excellent, providing a simple clip design that’s secure and can be easily pre-mounted to a monitor for simple installation. The way this mount works accommodates monitors that have a slightly recessed mount position, which may cause problems for other monitor arms. As the pioneer and leader of office ergonomics, Humanscale makes products that allow workstations to adapt to the user, not the other way around. Founded in 1983 by CEO Robert King with a focus on high-performance tools that support a healthy, more active way of working, Humanscale is now the global ergonomics leader with a reputation for designing intuitive products which improve the comfort and health of office workers. Brand leading Monitor arm support systems such as the M2 & M8 monitor arms and the scalable MFlex monitor support system that allows additional monitor supports, up to six, to be added as the need arises. In today’s fast-paced, agile work environment, there’s no time for discomfort. M8.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M8.1 meets a variety of configuration needs for single monitors from 6 to 28 pounds or – with an optional crossbar support – dual monitors up to 12 pounds each.Each monitor arm is almost all metal with only a small piece of plastic to provide cable routing. The arm also has gas springs capable of lifting up to 26 pounds of weight, which is enough to handle 32-inch widescreen and 34-inch ultrawide monitors. Setup is simple. The monitor has an included clamp and grommet mount. Installation is mostly handled with a bundled Allen wrench, though you’ll still need a Philips head screwdriver to attach your monitor to the VESA mount. Most owners will be able to install smaller monitors (24 to 27 inches) alone, but help is recommended for larger displays. Monitor size limits should be respected as well. It might be possible to attach a 40-inch monitor to an arm meant for a 32-inch monitor. The 40-inch monitor may even come within the arm’s weight limit. A larger monitor will distribute weight differently, however, which could cause an arm’s tension mechanism to fail. How we test monitor arms The monitors range of adjustment is a bit limited compared to the LX. It offers 11.5 inches of height, 75 degrees of tilt, 180 degrees of swivel, and 360 degrees of rotation. However, a somewhat more limited height adjustment is typical in this category due to the size of monitors these stands are expected to carry.

The monitor’s range of adjustment isn’t much different from other high-end monitor arms. It offers 13.3 inches of vertical adjustment, 80 degrees of tilt, and 360 degrees of swivel and rotation. That’s essentially identical to the less expensive Ergotron LX. The Flo’s operation is smoother, however: I found I could adjust a monitor’s height with a mere nudge. In today’s fast-paced, agile work environment, there’s no time for discomfort. M2.1, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Fully compatible with traditional desks and sit/stand workstations alike, M2.1 meets a variety of configuration needs for lighter monitors up to 15.5 lbs.

About Humanscale Monitor Arm Range

Surprisingly, the Flo has a listed weight limit of 20 pounds and recommends use with monitors weighing at least 7 pounds. Most monitors fit within this range, but some heavier models won’t be compatible with the Flo.

Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M10 enables the personalization and flexibility needed for today’s evolving workplaces. A standout feature of this microphone suspension boom arm is its ability to rotate 360 degrees. This is particularly useful in those moments when you get a sudden inspiration to record. You can instantly manipulate the position and angle to suit your needs. Featuring innovations like Humanscale’s patented Weight-Compensating Spring Technology and Smart Stop functionality, M2.1 enables the personalization and flexibility needed for today’s evolving workplaces. Designed to suit a range of settings, the M2 allows the user to bring their work to them, versus having to adjust to a static monitor stand. M2’s articulating arm offers effortless height and depth adjustment for the majority of flat-panel screens available today, accommodating monitors up to 9kg (20 lbs.). Two monitors are always better than one, and the same goes for monitor arms. It’s no surprise, then, that Ergotron’s LX Side-by-Side ranks as our best dual monitor arm. The Ergotron LX Side-by-Side pairs two LX monitor arms together on one mount. The look, feel, and specifications of each arm are close to its standalone sibling.There’s one unusual feature: a USB hub. This includes two USB ports that are placed at the front of the arm base. Each of these will need to plug in to your computer, which might be a problem if you have a laptop with just a few ports, but it’s a functional bonus. Want a monitor arm that gets the job done and looks good doing it? The Herman Miller Flo is for you. The RODE PSA 1 is a premium quality desktop stand that is a convenient addition to a recording studio. RODE are renowned for their durable, industry-standard microphones, so you can rest assured that the PSA 1 is built with the same quality. In today’s fast-paced, agile work environment, there’s no time for discomfort. M10, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Built to hold heavier equipment, it's optionalstrong triple crossbar allows M10 to hold up to three monitors or 48 pounds – all while maintaining a simple and sleek design. In today’s fast-paced, agile work environment, there’s no time for discomfort. M10, part of Humanscale’s revolutionary new monitor arm line, instantly improves the comfort, health and productivity of any workspace. Built to hold heavier equipment, it's optional strong triple crossbar allows M10 to hold up to three monitors or 21.8 kg (48 lbs.) – all while maintaining a simple and sleek design.