Rust-Oleum 400ml Chalky Finish Furniture Spray Paint - Chalk White

Product Information

Coverage: Up to 14m2 / litre. Coverage may vary depending uponmethod and rate of application and porosity of surface. Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for the disposal of waste coatings.

Preparation: Ensure surface is clean, dry and free from contamination.Use sugar soap equivalent to remove all traces of contamination, rinse Surface Preparation - For best results, ensure the surface is clean, dry and free from loose paint, mould and mildew, wax or oil. If wax has been used clean the surface thoroughly with a suitable wax remover. We recommend that bare wood should be sanded before painting. Hard glossy surfaces should be abraded before painting. Cover surrounding areas to protect from spray mist. Application: Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by bush, apply evenly following the grain of the wood. If rollering, use a nap mohair roller. To create a distressed look apply two coats in contrasting colours. Allow to dry then lightly abrade with moistened sand paper or a stainless steel scouring pad - abrade with the grain of the wood. Protect the effect with Rust-Oleum Furniture Finishing Wax.Coverage: Up to 12 - 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface. Stain Removal: Remove any stains promptly, most common stainse.g. dirt, ketchup, mustard, tea, coffee can be removed using a softcloth and warm soapy water. Do not use scourers or abrasive cleanersas these may mark the paint finish. Available in an extensive range of 100+ colours, brighten your interior walls with vibrant brights, playful pastels or soothing neutrals For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned. Drying Time: Touch dry in 2 hours. Apply a second coat after 2 hoursif necessary. Hard dry in 4 hours, full hardness achieved after 7 days.

A luxurious durable matt finish for interior walls and ceilings.Class 1 scrub rated for easy cleaning. Scuff and stain resistant. Application: Stir thoroughly prior to use. The product may be appliedby brush or medium pile roller. Limitations: For interior use only. Temperature at time of theapplication and during drying should be greater than 5°C. To ensurepaint suitability for your particular project test on a small inconspicuousarea first.Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned. Clean Up: Remove as much product as possible from applicationequipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for thedisposal of waste coatings. Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting. Drying Time: Touch dry in 1 hour. Handle after 4 hours. Apply a second coat after 4 hours, if necessary. Full hardness after 4 hours.