Plasti Dip Plastic/Rubber Paint - Spray - Luxury Metal (Ultrasonic Blue Metallic)

Product Information

PROBLEM SOLVED. Year after year we had water seeping into the family room of our split level house. Many products were tried, and many hours were wasted, until I discovered Blue Max. In the 9 months since applying Blue Max, we have been inundated with snow and torrential rains, but not a drop of precipitation got through. Thank you so much. The broad and growing use of rubberized and polyurea coatings on corrosive, high-impact and high-wear applications, combined with the significant cost of reapplying these coatings, suggests that applicators need to get surface preparation right the first time. Why Is The Plasti Dip Sagging Or Dripping Tracey took the time to understand my job and is completely thorough in explaining in detail how to do the job right. Customer Service is very important to me and Tracey unquestionably knows Ames products and application. This is the way a company should be run. Gives excellent durability combined with good resistance to acids, alkalis and oxidising agents in aqueous and gaseous forms

Honestly I have a 2009 Infiniti G37 I was told this was pretty much an exact match for hyper silver which it is I must confirm. You may want to consider branding and selling as a hyper silver touch up because it is absolutely dead on. Surfaces previously painted with Teamac Chlorvar and that are in good condition can be scrubbed clean and the surface roughened to help adhesion of the new coating. Old perished Chlorvar coatings should be removed mechanically and treated as new substrate and prepared accordingly.Due to the quality of the compound, blue nitrile rubber sheet provides enhanced tensile strength, e longation at break, and resistance to temperatures in comparison to standard grades of nitrile rubber sheet. Metal detectable nitrile rubber gasketsare cut from a synthetic elastomer that contains additives which are visible to the majority of metal detector scanning equipment. The material provides excellent resistance to abrasion and tear and is suitable for use with dry and wet foodstuffs due to its conformance with regulation EC1935:2004. Metal detectable nitrile gaskets alsomaintain the key characteristics of standard nitrile rubber gaskets, as well as providing enhanced mechanical properties. Plasti Dip Primer is an adhesion promoter. Only use a primer to increase adhesion if you require a permanent coating. For permanent application, keying the surface with fine grit paper will improve adhesion if required. Our basement wall leaked all the time, we even got mold and had floods. Got rid of the mold applied this product and it is great, we have gone 2 years with no leaks. We are redoing another room with a partial basement wall and decided to use this as a precaution. Very impressed with Blue Max.

Teamac Chlorvar Chlorinated Rubber Paint, is a modified chlorinated rubber finish coat available in 4000+ colours from RAL, NCS and British Standard, for use over Metaclor Antifouling Primer. Available in 2,600+ colours from RAL, BS, NCS & the new NCS 2050 colours. On vehicles or irregular shaped items, particular attention should be paid to the sills, trim, gutters, grills, any tight or hard to get to corners and gullies that you would not normally concentrate on. NON-PERMEABLE Rubber coatings create an impermeable barrier between the substrate and the environment. They can withstand ponding water for flat roofs, or be used in overspill containment. They are waterproof, vapour tight, air and gas barriers.

What You Will Need:

UV STABILITY The coating stays flexible for longer and does not chalk, embrittle, or lose strength with exposure to UV radiation. Use On: Metal Wood Plastic Paperboard Corrugated Paper Art Paper Other Paper Products Ceramics Fabric Fiberglass Key Features Good resistance to acids, alkalis and oxidising agents in aqueous and gaseous forms. Touch Dry (at 20°C) 40 Minutes Dry to Handle (at 20°C) 6 Hours Dry to Recoat (at 20°C) At any stage after. Fully Cured (at 20°C) 24 Hours Density 1.053 g/cm³ Solids by Volume 48.2 % VOC 0.50kgs/ltr Shelf Life (from date of manufacture) 12 months from delivery date in original sealed containers. Finish Gloss Size 1L

Data sheet Manufacturer Teamac For Use By Consumer Use Interior / Exterior Use Interior and Exterior Interior / Exterior Use Interior & Exterior use For Use On Metal Layers are touch dry and re-coatable in 30-45 minutes at 16-22°c and totally cured/dry 24-48 hours depending on temperature. Increase drying times in colder conditions. Liquid rubber is the only thing under the harsh Australian sun that benefited From torrential rain and salt living by the sea. It has been great doing business with your paint results and I will always usually morning touchup or anything; paint for my car. Rudy C, owner of a 2012 Hyundai from Sulphur, LAColours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. The paint matched perfect. I got a body shop painter to do the job. He was very impressed with the spray cans. Thank you, Rudy