Potterton EP2 Twin Channel Programmer

Product Information

Faulty Air Pressure Switch – If this switch is sending the wrong signals to the PCB, this can lead to this problem as well as others. If you have an older boiler, you might, therefore, want to consider replacing the whole boiler with an energy-efficient new boiler that could end up saving you money in the long run. # 3 – Cold Return Pipe

If it is a minor issue, such as the wiring, the fix should be relatively simple and affordable. If there is a problem with a major component such as the PCB, this is an altogether bigger and more expensive. The only way to fix a leak is to find where it is and close it up. This is sometimes a minor job that you can do yourself by tightening a joint or using a DIY sealant. If the issue is with a soldered joint, it is usually a relatively minor issue to fix it.

The smarter way to replace your boiler

Wiring issues – if your boilers wiring has come loose or got damaged, this can affect the signal reached the printed circuit board (PCB). An engineer will need to look at all of the possible causes of this problem to ascertain which issue your Potterton boiler has. An issue with the central heating pump – the pump is struggling to push water around the system. This could be caused by a problem with the settings or even a blown seal. This is a problem that you will need an engineer to help you fix. If the problem is being caused by limescale, the engineer will be able to clean things up using specialist chemicals. He will probably do this by carrying out a hot flush. A relatively common issue with older Potterton boiler models such as the Potterton Promax, Suprima and Profile models is an issue where the heating works but there is no hot water.

In this guide, we look at the various types of Potterton boiler controls and what they can do for you and your home. Potterton Electro-Mechanical 24 Hour TimerMy system originally had a multi fuel coal boiler, as we did not have mains gas in the village. We had a radiator in the loft that remained on all the time then, I think all the other rads had TRV's, and from memory I think we had a room stat in the hall but cannot remember. Potterton boilers are generally very good, but all boilers can develop issues, especially as they get older, and Potterton is no exception to this.