STANLEY Cubix Cross Line Red Beam Laser STHT77498-1

Product Information

The first laser automatically adjusts to the level of the terrain for ease of use, whether you’re on uneven terrain or on the level. The laser level working range is specified (in metres) both with and without a receiver , so bear this in mind when comparing values. The MM02 mount comes with the Quigo laser level, and it steps the tool up a few notches in terms of versatility. You can attach the mount to a wide range of structures, like a step ladder, and use the fine adjustment wheel for ultimate accuracy.

Turning the laser on is done via a sliding switch, and the laser starts in automatic levelling mode. The laser flashes when it’s not level and will continue to do so until it finds equilibrium. It will self-level within ± 4°. Step 1: First, remove any obstructions from around the area where you are going to work on your project. Laser levels should be able to shoot grids on walls or mark out plumb dots, although not all have a plumb dot mode. You can choose between red and green laser levels. Red lasers are more common and budget-friendly, but the better laser levels are the green ones. The only feature missing from the KT360A is a plumb dot. Available on the Kaiweets KT360B, it shoots a laser dot vertically above and below the unit. This handy feature means you can find the plumb point in any given space. It’s great for laying out stud walls, so it’s a shame that it’s not on this model. The Lasers

My Top Recommended Laser Levels

The protection rating is listed as IP54, which means it’s protected against dust ingress, but not exactly waterproof. It’s going to be fine in a rain shower, but don’t expect to be able to drop the laser in a pool of water without damage. Operation Out of bright sunlight, and especially in the dark, the laser was easy to find up to 30 metres away. I was guessing at the exact distance, but it was far enough away to be impressive. For most jobs that a DIYer will take on, it’s absolutely fine. Operation literally couldn’t be any more straightforward. The lens case doubles up as the switch! You simply slide it out of the way and the green cross line shines out nice and brightly. You can’t cycle through modes, but for the price, this is an accurate and useful laser tool. This is a robust laser unit with plenty of rubberised plastic in the construction and all the corners are well protected. Cycling through laser modes is straightforward. Choose from cross, horizontal, and vertical by simply pressing the button on top.

Stanley Cubix Laser Level review features a magnetic base, which allows hands-free use, and a large base plate, which offers a stable working platform. For example, some products may only offer an easy setup, while others may require frequent calibration. So choose carefully.Horizontal laser levelling line accuracy is an important feature – this is specified in mm/m, with lower numbers more favourable. The best laser levels are accurate to within +/-0.2 mm/m. What makes this a great DIYers laser is just how simple it is to use. Because there aren’t lots of modes, the whole thing is activated with a single switch. You’re not going to accidentally turn it on inside the case like some lasers with soft touch buttons. There are three laser modules on this level. You get a horizontal one mounted on the top, and two vertical lasers mounted on the front and side of the unit. You can turn on each laser individually, or cycle through the different modes to shine lasers across the floor, walls, and ceiling. The two buttons on the front of the level are soft touch ones that cycle through the different modes and activate the pulse mode.