Wilton B.A.S.H 36" Sledge Hammer, 20 Lb Head (22036)

Product Information

A sledgehammer is an important part of any professional or DIYer’s tool arsenal. Although most sledgehammers consist of a steel head attached to a handle, many characteristics distinguish a quality sledgehammer from a run-of-the-mill product. Handle material, length, and arrangement all play an important role in a sledgehammer’s quality and designed use. Dead Blow Hammer: A dead blow hammer is a type of sledgehammer that’s designed to minimize rebound when striking a hard surface. This is achieved by using a hollow head that’s filled with lead shot. Dead blow hammers are often used in automotive and industrial settings. They come in two basic designs flat head or spiked. Flat is better for all around demolition work while a spike is better for penetrating into a slab or masonry wall.

Sledgehammer - Wikipedia Sledgehammer - Wikipedia

Breaking up pavement: Sledgehammers are used in landscaping to break up pavement, concrete slabs, walkways or asphalt. A sledgehammer can deliver a precise blow where the slab is weakest breaking it up into small enough pieces to carry away. Both are prone to break near the head on a bad hit, and when that happens wood handles are easier and cheaper to replace. Proper Grip & Stance: Always maintain a proper grip and stance when swinging a sledgehammer. The handle should be held with both hands, one hand should be near the head of the hammer and the other near the end. Your feet should be about shoulder width apart in an athletic stance, with one foot slightly forward. This stance will provide a solid base of support and help to balance your body when swinging the hammer. The handle can range from 50 centimetres (1ft 8in) to a full 1 metre (3ft 3in) long, depending on the mass of the head. [3] The head mass is usually 1 to 9 kilograms (2.2 to 19.8lb). Modern heavy duty sledgehammers come with 10-to-20-pound (4.5–9.1kg) heads. Sledgehammers usually require two hands and a swinging motion involving the entire torso, in contrast to smaller hammers used for driving in nails. The combination of a long swinging range, and heavy head, increases the force of the resulting impact.

Sledge hammers come in a variety of designs which make them more effective at specific jobs. The most common design is a flat head that weight between 6 to 22 pounds mounted on a 36 inch shaft. But the shaft length, head design and head weight can vary based on the job you’re doing. A sledghammer is a demolition tool featuring a very heavy metal head mounted to a long light weight shaft. It’s designed to be swung which produces a lot of force. Learning to use a sledgehammer safely is very important because they can cause significant injury to yourself or others. Drilling hammer [ edit ] A man cutting a paving stone using a drilling hammer to drive a chisel Drilling hammer Before using a sledgehammer, you must be comfortable with the weight and feel of the tool. If the sledgehammer feels too heavy, or you feel out-of-control while using it, stop immediately. If you’re new to using a sledgehammer, follow these steps on how to swing your heavy-duty tool the right way.

20.5 lbs. Nylon Sledgehammer with 39.37 Supercraft Dead Blow 20.5 lbs. Nylon Sledgehammer with 39.37

You don't have permission to access "http://www.homedepot.com/p/Bon-Tool-36-in-20-lbs-Sledge-Hammer-84-577/310276421" on this server.An 8 pound sledge hammer is one of the most common sizes used in residential construction. It’s heavy enough to demolish most things you’ll encounter like cabinets, wood framed walls and thin concrete slabs but isn’t overly heavy. Which Is The Better Sledge Hammer Handle Wood Or Fiberglass?